.:HSTuners::

Preludesitdriver · 02-15-2005, 07:51 PM

http://www.cardomain.com/member_pages/show_image.pl?

Ok my problem i am having is that when vtec kicks in my power just takes a big fall. This is what my last dyno sheet was.

My first dyno times i ran only 169whp and 158 torqe on the top sheet.

2nd sheetyou see listed was this month 13 feb 05, and it was 200 whp and 208.99 torqe. I also question how the hell do i get more torqw than HP

My motor is completely built with 9:1 comp ratio only thing i have not after market is my cams. they are stock h22a cams

ebpda9 · 02-15-2005, 07:53 PM

sounds to me like your fuel curves are not setup right.

Preludesitdriver · 02-15-2005, 08:01 PM

my setup:

1 piece darton sleeve
je 9:1 comp psitons
crower rods
crower titanium seats
stock cams
oversize valves intake and exhuast .05mm oversize
port polished head
skunk2 adj cam gears
micropolished crank
pro billit oil pump gears
act xtream with 6 puck
blueprinted block
msd blaster 2, sci, wires

walboro intank fp
aem fuel rail
b&m fpr
450cc injectors
hondata s200 with p28 ecu

thermal · 02-15-2005, 08:42 PM

I need turbo specs. Is your Hondata dyno tuned or just base map? email me a bigger picture of your dynograph: thermal99@excite.com

Preludesitdriver · 02-15-2005, 09:12 PM

hey i sent you the pics i know they arent that good. the 2nd set i sent which look better those are my first dyno runs since the install. i am running a tuned chip for hondata. its not the greatist being that we can not get it to hit vtec the right way. i am not sure what else i can do. hope those help a little.

ps the dyno on the page here is the best its gonna get. i dont have a scanner now

02-15-2005, 07:51 PM	#1
Preludesitdriver Parked Join Date: Feb 2005 Location: NC, FL Age: 46 Posts: 18	H22a Trubo Help NO power http://www.cardomain.com/member_pages/show_image.pl? Ok my problem i am having is that when vtec kicks in my power just takes a big fall. This is what my last dyno sheet was. My first dyno times i ran only 169whp and 158 torqe on the top sheet. 2nd sheetyou see listed was this month 13 feb 05, and it was 200 whp and 208.99 torqe. I also question how the hell do i get more torqw than HP My motor is completely built with 9:1 comp ratio only thing i have not after market is my cams. they are stock h22a cams __________________ Bring It!!! Last edited by Preludesitdriver : 02-15-2005 at 07:54 PM.

02-15-2005, 07:53 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	sounds to me like your fuel curves are not setup right. __________________

02-15-2005, 08:01 PM	#3
Preludesitdriver Parked Join Date: Feb 2005 Location: NC, FL Age: 46 Posts: 18	my setup: 1 piece darton sleeve je 9:1 comp psitons crower rods crower titanium seats stock cams oversize valves intake and exhuast .05mm oversize port polished head skunk2 adj cam gears micropolished crank pro billit oil pump gears act xtream with 6 puck blueprinted block msd blaster 2, sci, wires walboro intank fp aem fuel rail b&m fpr 450cc injectors hondata s200 with p28 ecu __________________ Bring It!!!

02-15-2005, 08:42 PM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I need turbo specs. Is your Hondata dyno tuned or just base map? email me a bigger picture of your dynograph: thermal99@excite.com __________________ Project Teg Visit the Turbo Forum

02-15-2005, 09:12 PM	#5
Preludesitdriver Parked Join Date: Feb 2005 Location: NC, FL Age: 46 Posts: 18	hey i sent you the pics i know they arent that good. the 2nd set i sent which look better those are my first dyno runs since the install. i am running a tuned chip for hondata. its not the greatist being that we can not get it to hit vtec the right way. i am not sure what else i can do. hope those help a little. ps the dyno on the page here is the best its gonna get. i dont have a scanner now __________________ Bring It!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode