.:HSTuners::

Fatal070 · 12-26-2003, 12:46 PM

im not sure what that means , does that mean my motor is done???? god i hope not

guywithastang · 12-26-2003, 12:57 PM

Yes your motor is toast. Unrepairable damage

Fatal070 · 12-26-2003, 01:02 PM

could i get a new block??

guywithastang · 12-26-2003, 01:07 PM

you need a new motor. Your block probably cracked because the engine changed temp. to quickly. That can mess up other things and it all should be replaced.

*AzCivic* · 12-26-2003, 06:40 PM

damn! did that engine come with any kind of warranty?

Fatal070 · 12-26-2003, 06:50 PM

i bought it in July but i ddint have my car car was done in oct

*pdiggitydogg* · 12-26-2003, 07:53 PM

holy shit that could be the absolute worst luck dude.......if it is cracked call up where you got it and raise hell
not your fault that it didnt go in until recently

IALuder · 12-26-2003, 10:07 PM

cracked blocked=**** MAJORLY. been there.

there are many reasons why a motor can crack. such as driving way to hard, blown headgasket and driving with it, driving a cold engine, fried piston rings which leads to blown headgasket......

either way you have to get a new motor completely. sure you could by a block, but i suggest just buying a new motor.

Fatal070 · 12-26-2003, 11:47 PM

nothing has leaked i havn't goten a chance to take her apart gonna do it this week sometime
im have the worste luck lately life just shiting one me real bad

, i hope this block isnt ****ed i really do u guys dont understand i have not had my car one the road 4 mounths out of 2003 i swear to god its been a bad year

*AzCivic* · 12-27-2003, 01:23 AM

what makes you think the block is cracked anyway?

B16DoHcCrx033003 · 12-27-2003, 03:59 PM

a simple test to see if you have a blown head gasket is to see if theres oil in your antifreeze, we do it all the time in my autotech class. Or do a dry compression test. Blown Gasket or cracked block will make compression drop majorly.....

IALuder · 12-27-2003, 04:07 PM

^true. also blown headgasket push the antifreeze out around the radior cap.

GT40FIED · 12-28-2003, 09:44 PM

If the block is cracked the symptoms are a lot like a blown gasket, excepta compression test will usually reveal one cylinder way low (this can happen with a gasket too, but not usually). You'll sometimes find coolant in the oil if the crack is near a water jacket or a good sized split. Trust me...it's generally not a pretty sight. The engine that came with my car (a stock 302) was on it's last leg and after a few small mods and some hard charging, I literally ventilated the block when one of the rods decided it didn't like the way I was treating it (turned out it was a shoddy rebuild done years ago that the guy who owned it before me, the second owner, didn't know about). A huge mess of oil and coolant. Once a block is cracked, even a small crack, it needs to be replaced as many others have pointed out. You still haven't mentioned what makes you think your block is shot.

drdingo21 · 12-29-2003, 09:32 AM

Fatal070,

Why not use JB weld? The package says it will work.

JJ

BTW im just kidding, you will defintly be in the market for a new motor

B16DoHcCrx033003 · 12-29-2003, 09:41 AM

i was jsut over his house yesterday look at it, i think its the gasket, i didnt notice any major external crack, but who knows me be internal, its sounds like its bogging out and the exhuast smells sweet so its burning antirfreeze, i mostly think its the gasket and so does he, he should be posting soon to tell everything

IALuder · 12-29-2003, 12:47 PM

run a compression test.

thermal · 12-29-2003, 02:12 PM

show pictures!

12-26-2003, 12:46 PM	#1
Fatal070 Registered User Join Date: Apr 2002 Location: New Castle , Pa Age: 41 Posts: 1,299	what if my block is cracked im not sure what that means , does that mean my motor is done???? god i hope not __________________

12-26-2003, 12:57 PM	#2
guywithastang Registered User Join Date: Oct 2002 Location: some corn field in Iowa Age: 44 Posts: 337	Yes your motor is toast. Unrepairable damage __________________ thats not bad, for a honda You say VTEC, I say V-8

12-26-2003, 01:02 PM	#3
Fatal070 Registered User Join Date: Apr 2002 Location: New Castle , Pa Age: 41 Posts: 1,299	could i get a new block?? __________________

12-26-2003, 01:07 PM	#4
guywithastang Registered User Join Date: Oct 2002 Location: some corn field in Iowa Age: 44 Posts: 337	you need a new motor. Your block probably cracked because the engine changed temp. to quickly. That can mess up other things and it all should be replaced. __________________ thats not bad, for a honda You say VTEC, I say V-8

12-26-2003, 06:50 PM	#6
Fatal070 Registered User Join Date: Apr 2002 Location: New Castle , Pa Age: 41 Posts: 1,299	i bought it in July but i ddint have my car car was done in oct __________________

12-26-2003, 06:40 PM	#5
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	damn! did that engine come with any kind of warranty?

12-26-2003, 07:53 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	holy shit that could be the absolute worst luck dude.......if it is cracked call up where you got it and raise hell not your fault that it didnt go in until recently

12-26-2003, 10:07 PM	#8
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	cracked blocked=**** MAJORLY. been there. there are many reasons why a motor can crack. such as driving way to hard, blown headgasket and driving with it, driving a cold engine, fried piston rings which leads to blown headgasket...... either way you have to get a new motor completely. sure you could by a block, but i suggest just buying a new motor. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

12-26-2003, 11:47 PM	#9
Fatal070 Registered User Join Date: Apr 2002 Location: New Castle , Pa Age: 41 Posts: 1,299	nothing has leaked i havn't goten a chance to take her apart gonna do it this week sometime im have the worste luck lately life just shiting one me real bad , i hope this block isnt ****ed i really do u guys dont understand i have not had my car one the road 4 mounths out of 2003 i swear to god its been a bad year __________________

12-27-2003, 01:23 AM	#10
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	what makes you think the block is cracked anyway?

12-27-2003, 03:59 PM	#11
B16DoHcCrx033003 4th Gear Join Date: Sep 2003 Location: New Castle, PA Age: 37 Posts: 621	a simple test to see if you have a blown head gasket is to see if theres oil in your antifreeze, we do it all the time in my autotech class. Or do a dry compression test. Blown Gasket or cracked block will make compression drop majorly.....

12-27-2003, 04:07 PM	#12
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	^true. also blown headgasket push the antifreeze out around the radior cap. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

12-28-2003, 09:44 PM	#13
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	If the block is cracked the symptoms are a lot like a blown gasket, excepta compression test will usually reveal one cylinder way low (this can happen with a gasket too, but not usually). You'll sometimes find coolant in the oil if the crack is near a water jacket or a good sized split. Trust me...it's generally not a pretty sight. The engine that came with my car (a stock 302) was on it's last leg and after a few small mods and some hard charging, I literally ventilated the block when one of the rods decided it didn't like the way I was treating it (turned out it was a shoddy rebuild done years ago that the guy who owned it before me, the second owner, didn't know about). A huge mess of oil and coolant. Once a block is cracked, even a small crack, it needs to be replaced as many others have pointed out. You still haven't mentioned what makes you think your block is shot. __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

12-29-2003, 09:32 AM	#14
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 42 Posts: 1,642	Fatal070, Why not use JB weld? The package says it will work. JJ BTW im just kidding, you will defintly be in the market for a new motor

12-29-2003, 09:41 AM	#15
B16DoHcCrx033003 4th Gear Join Date: Sep 2003 Location: New Castle, PA Age: 37 Posts: 621	i was jsut over his house yesterday look at it, i think its the gasket, i didnt notice any major external crack, but who knows me be internal, its sounds like its bogging out and the exhuast smells sweet so its burning antirfreeze, i mostly think its the gasket and so does he, he should be posting soon to tell everything

12-29-2003, 02:12 PM	#17
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	show pictures! __________________ Project Teg Visit the Turbo Forum

12-29-2003, 12:47 PM	#16
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	run a compression test. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode