.:HSTuners::

12-08-2002, 04:27 PM

I have a 2001 Civic and i cant get the piece that covers the radio off nor the rest of the vents i need to paint!! i have the two side vents off and painted but cant get the middle two off with the rest of that piece anyone kno please help

12-08-2002, 04:32 PM

I need to get the middle piece and rest of my vents off a 2001 civic i have the other two vents off already i am painting all of it but i need to know if there are extra screws im missing or how to take it off please help!

Rob · 12-08-2002, 04:41 PM

Please don't double post...........

94_AcCoRd_EX · 12-08-2002, 05:16 PM

Moving to Civic forum...

*BlackDeuceCoupe* · 12-08-2002, 09:13 PM

Merging threads...

blind34_1 · 12-08-2002, 10:38 PM

three responses and no one answers him...poor guy.

Well, I don't know if i can either. ive never dealt with the newer civics. I think the center peice that you want is all connected together. Like from the environment controls, down past the stereo, down to your shifter. All of that has to come out. Lay down on your passenger side floor and look at the backside of the center console. There should be mounting screws, but I couldnt tell you where. There should probably also be some screws olong the sides by the shifter, and/or farther back. DONT LOSE THE SCREWS. It sucks when you cant put your dash back together. Also, you'll have to remove your shift knob. it just screws off. (dont paint it.)

again, dont rush your paint job. do many coats, and allow it the dry. Then do a few clear coats.

*BlackDeuceCoupe* · 12-09-2002, 12:41 AM

Quote:

Originally posted by blind34_1
three responses and no one answers him...poor guy...

Thanks for your response!

We didn't have an answer, but it's best to let ppl know why their thread has been closed, moved, merged and so forth; makes for less hard feelings in the long run. No disrespect was intended...

*Addict* · 12-09-2002, 11:08 AM

On the 99-00 Civics, the center console is ONE piece.

Not sure on the 01+ though.

12-09-2002, 12:19 PM

but was it some kinda clips that held it on? or was it adhesive?

*Addict* · 12-09-2002, 12:36 PM

Quote:

Originally posted by JamieS697
but was it some kinda clips that held it on? or was it adhesive?

Clips. It required some force to get it out. They are little snap in clips(metal).

nonovurbizniz · 12-09-2002, 03:00 PM

you should get a helms manual yo!

they be having pictures/directions up in that piece.

be careful though you can snap the piece while pulling it.

12-09-2002, 10:33 PM

Where do u get that manuel i asked autozone and some other car places and they said there was no manuel

*Addict* · 12-10-2002, 07:41 AM

Quote:

Originally posted by JamieS697
Where do u get that manuel i asked autozone and some other car places and they said there was no manuel

The Chilton or Helms may not be out yet.

www.helminc.com is where to get the Helms manual.

12-12-2002, 02:54 PM

too many choices first i did the same as my gauge face i popped it out alil the whole thing started to come out but damn if it isnt all attached. WHat i mean is the radio/cd player is attached to that part somehow and is holding it back im just getting really pissed bc as soon as i get to another step i go back two

nonovurbizniz · 12-16-2002, 12:08 PM

it'd be helpful if you posted a pic of the dash. but I just did this on a 92-95 thisweekend...

on mine THERE IS a screw holding the panel on UNDERNEATH THE HAZARD SWITCH. your best bet is to pry out any buttons/clock CAREFULLY... there will proboly be a screw hidden behind one of them. once this is removed you need to use moderate to healthy force to pull the piece out.

Then you just dis-connect the wire harness' to the switch and clock.

If this doesn't help I suggest contacting helms inc. they should have a manual they usually are ready before the car is released.

good luck.

12-18-2002, 01:10 PM

cant post a pic cause i dont have a dig. camera. but i did try to pop off the hazard switch yup had no luck im gonna give it another try in a couple days when i have the free time ill let ya know

nonovurbizniz · 12-18-2002, 02:57 PM

step up the size screw driver your prying with at least once.

I started with a really small flat head then went to like a #2.

It was kind of a pain in the a... but with patience it came out.

good luck

12-08-2002, 04:27 PM	#1
JamieS697 Posts: n/a	Help!! How do u get the peices off the dash??? I have a 2001 Civic and i cant get the piece that covers the radio off nor the rest of the vents i need to paint!! i have the two side vents off and painted but cant get the middle two off with the rest of that piece anyone kno please help

12-08-2002, 05:16 PM	#4
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	Moving to Civic forum... __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

12-08-2002, 09:13 PM	#5
BlackDeuceCoupe The Great Ape Join Date: Sep 2001 Location: Skull Island Posts: 774	Merging threads... __________________ Posted by BlackDeuceCoupe - 2oo0 Honda CiViC FBP HX cOUPe "Pay special attention to posts by BlackDeuceCoupe, the instigator of the forum, who does a nice job of breaking my column and responses down." - Paul Brink, ASU State Press DISCLAIMER The existence of BDC is disputable. The existence of views, in the absence of anyone to hold them is problematic. The existence of the reader is left as an exercise in the second order coefficient.

12-09-2002, 03:00 PM	#11
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	you should get a helms manual yo! they be having pictures/directions up in that piece. be careful though you can snap the piece while pulling it. __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

12-16-2002, 12:08 PM	#15
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	it'd be helpful if you posted a pic of the dash. but I just did this on a 92-95 thisweekend... on mine THERE IS a screw holding the panel on UNDERNEATH THE HAZARD SWITCH. your best bet is to pry out any buttons/clock CAREFULLY... there will proboly be a screw hidden behind one of them. once this is removed you need to use moderate to healthy force to pull the piece out. Then you just dis-connect the wire harness' to the switch and clock. If this doesn't help I suggest contacting helms inc. they should have a manual they usually are ready before the car is released. good luck. __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

12-08-2002, 04:32 PM	#2
JamieS697 Posts: n/a	Help!! How do u get the peices off the dash??? I need to get the middle piece and rest of my vents off a 2001 civic i have the other two vents off already i am painting all of it but i need to know if there are extra screws im missing or how to take it off please help!

12-08-2002, 10:38 PM	#6
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 40 Posts: 1,813	three responses and no one answers him...poor guy. Well, I don't know if i can either. ive never dealt with the newer civics. I think the center peice that you want is all connected together. Like from the environment controls, down past the stereo, down to your shifter. All of that has to come out. Lay down on your passenger side floor and look at the backside of the center console. There should be mounting screws, but I couldnt tell you where. There should probably also be some screws olong the sides by the shifter, and/or farther back. DONT LOSE THE SCREWS. It sucks when you cant put your dash back together. Also, you'll have to remove your shift knob. it just screws off. (dont paint it.) again, dont rush your paint job. do many coats, and allow it the dry. Then do a few clear coats.

12-09-2002, 12:19 PM	#9
JamieS697 Posts: n/a	but was it some kinda clips that held it on? or was it adhesive?

12-09-2002, 10:33 PM	#12
JamieS697 Posts: n/a	Where do u get that manuel i asked autozone and some other car places and they said there was no manuel

12-12-2002, 02:54 PM	#14
JamieS697 Posts: n/a	too many choices first i did the same as my gauge face i popped it out alil the whole thing started to come out but damn if it isnt all attached. WHat i mean is the radio/cd player is attached to that part somehow and is holding it back im just getting really pissed bc as soon as i get to another step i go back two

12-18-2002, 01:10 PM	#16
JamieS697 Posts: n/a	cant post a pic cause i dont have a dig. camera. but i did try to pop off the hazard switch yup had no luck im gonna give it another try in a couple days when i have the free time ill let ya know

12-18-2002, 02:57 PM	#17
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	step up the size screw driver your prying with at least once. I started with a really small flat head then went to like a #2. It was kind of a pain in the a... but with patience it came out. good luck __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode