HSTuners

HSTuners (http://www.hstuners.com/forums/index.php)
-   Civic/Del Sol (http://www.hstuners.com/forums/forumdisplay.php?f=12)
-   -   Help!! How do u get the peices off the dash??? (http://www.hstuners.com/forums/showthread.php?t=10119)

JamieS697 12-08-2002 04:27 PM

Help!! How do u get the peices off the dash???
 
I have a 2001 Civic and i cant get the piece that covers the radio off nor the rest of the vents i need to paint!! i have the two side vents off and painted but cant get the middle two off with the rest of that piece anyone kno please help

JamieS697 12-08-2002 04:32 PM

Help!! How do u get the peices off the dash???
 
I need to get the middle piece and rest of my vents off a 2001 civic i have the other two vents off already i am painting all of it but i need to know if there are extra screws im missing or how to take it off please help!

Rob 12-08-2002 04:41 PM

Please don't double post...........

94_AcCoRd_EX 12-08-2002 05:16 PM

Moving to Civic forum...

BlackDeuceCoupe 12-08-2002 09:13 PM

Merging threads...

blind34_1 12-08-2002 10:38 PM

three responses and no one answers him...poor guy.

Well, I don't know if i can either. ive never dealt with the newer civics. I think the center peice that you want is all connected together. Like from the environment controls, down past the stereo, down to your shifter. All of that has to come out. Lay down on your passenger side floor and look at the backside of the center console. There should be mounting screws, but I couldnt tell you where. There should probably also be some screws olong the sides by the shifter, and/or farther back. DONT LOSE THE SCREWS. It sucks when you cant put your dash back together. Also, you'll have to remove your shift knob. it just screws off. (dont paint it.)

again, dont rush your paint job. do many coats, and allow it the dry. Then do a few clear coats.

BlackDeuceCoupe 12-09-2002 12:41 AM

Quote:

Originally posted by blind34_1
three responses and no one answers him...poor guy...


Thanks for your response!

We didn't have an answer, but it's best to let ppl know why their thread has been closed, moved, merged and so forth; makes for less hard feelings in the long run. No disrespect was intended...

Addict 12-09-2002 11:08 AM

On the 99-00 Civics, the center console is ONE piece.

Not sure on the 01+ though.

JamieS697 12-09-2002 12:19 PM

but was it some kinda clips that held it on? or was it adhesive?

Addict 12-09-2002 12:36 PM

Quote:

Originally posted by JamieS697
but was it some kinda clips that held it on? or was it adhesive?

Clips. It required some force to get it out. They are little snap in clips(metal).

nonovurbizniz 12-09-2002 03:00 PM

you should get a helms manual yo!

they be having pictures/directions up in that piece.

be careful though you can snap the piece while pulling it.

JamieS697 12-09-2002 10:33 PM

Where do u get that manuel i asked autozone and some other car places and they said there was no manuel

Addict 12-10-2002 07:41 AM

Quote:

Originally posted by JamieS697
Where do u get that manuel i asked autozone and some other car places and they said there was no manuel


The Chilton or Helms may not be out yet.

www.helminc.com is where to get the Helms manual.

JamieS697 12-12-2002 02:54 PM

too many choices first i did the same as my gauge face i popped it out alil the whole thing started to come out but damn if it isnt all attached. WHat i mean is the radio/cd player is attached to that part somehow and is holding it back im just getting really pissed bc as soon as i get to another step i go back two;(

nonovurbizniz 12-16-2002 12:08 PM

it'd be helpful if you posted a pic of the dash. but I just did this on a 92-95 thisweekend...

on mine THERE IS a screw holding the panel on UNDERNEATH THE HAZARD SWITCH. your best bet is to pry out any buttons/clock CAREFULLY... there will proboly be a screw hidden behind one of them. once this is removed you need to use moderate to healthy force to pull the piece out.

Then you just dis-connect the wire harness' to the switch and clock.

If this doesn't help I suggest contacting helms inc. they should have a manual they usually are ready before the car is released.

good luck.

JamieS697 12-18-2002 01:10 PM

cant post a pic cause i dont have a dig. camera. but i did try to pop off the hazard switch yup had no luck im gonna give it another try in a couple days when i have the free time ill let ya know;(

nonovurbizniz 12-18-2002 02:57 PM

step up the size screw driver your prying with at least once.

I started with a really small flat head then went to like a #2.

It was kind of a pain in the a... but with patience it came out.

good luck


All times are GMT -5. The time now is 09:38 AM.

Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com