.:HSTuners::

*pdiggitydogg* · 11-20-2002, 12:43 AM

Ive been thinking of the custom turbo that I want to do but is there a way to just buy a downpipe for my civic? Ive looked everywhere but cant find any at all. All I can think of is custom fabrication...but I dont know where to get that done. I dont think Midas or Minekie does that do they?

ShEaNy · 11-20-2002, 12:55 AM

umm what do u plan on doing with this downpipe....without a turbo installed...?

*pdiggitydogg* · 11-20-2002, 01:06 AM

um...its for when the turbo is installed...eventually.
all I know is its 2am and im still up on my computer wonding about downpipes and turbos

*pdiggitydogg* · 11-20-2002, 01:18 AM

see im too tired to even spell right...wonding...wtf...w-o-n-d-e-r-i-n-g...there...I think I should go to bed now....:o

armyguy5 · 11-20-2002, 01:43 AM

go to a machine shop....they'll do it..just give em the specs

chris

11-20-2002, 03:35 AM

Quote:

Originally posted by pdiggitydogg
Ive been thinking of the custom turbo that I want to do but is there a way to just buy a downpipe for my civic? Ive looked everywhere but cant find any at all. All I can think of is custom fabrication...but I dont know where to get that done. I dont think Midas or Minekie does that do they?

Depending on what kind of turbo you're going to use you may be able to just buy one. If you're going to go with a T-3 style turbo you can just buy a downpipe from Rev-Hard or Drag or F-Max. If you are going to go with any other style turbo then you will have to get it custom bent which can be done at a Midas or Minekie.

*pdiggitydogg* · 11-20-2002, 11:53 AM

Well thats a suprise to me...I'll have to find a good one though...the one by my house is full of idiots that dont have a clue

*AzCivic* · 11-20-2002, 12:36 PM

Quote:

Originally posted by pdiggitydogg
Well thats a suprise to me...I'll have to find a good one though...the one by my house is full of idiots that dont have a clue

All midas's and meineke's are full of idiots, i think its a prerequisite or something.

ShagginJet · 11-20-2002, 06:48 PM

I think AzCivic is correct...

Hey Ditty, it all depends on how you do it. You can't get a specific down pipe unless you have the rest of the setup. Depending on what turbo you have the pipe may need to be different. depending on what exhaust manifold you use, it'll effect the position of the pipe. Also, how you mount the turbo, size of the flange. You have to mount it and then have someone make it, on the spot from scratch. especially if you're going to do a home made.

*pdiggitydogg* · 11-20-2002, 08:40 PM

yeah i figured it was all specific...it was just a general wondering

ShEaNy · 11-20-2002, 09:26 PM

id wait till u get a turbo first....then ull know EXACTLY what type u need....just my 2 bucks worth..lol.....and about ur headers in ur sig....y not install them now since its not turbo?

*pdiggitydogg* · 11-20-2002, 09:33 PM

'cause I dont want to make them used headers. I want them to be new so I can sell the stupid thing. why I bought it I have no idea probably just thought it'd be a good idea at the time

Oh and the dp is gonna be the last thing I get..hell more than likely I'll just get the greddy kit just because im so lazy

ShEaNy · 11-20-2002, 09:36 PM

lol....so u bought them said...what the hell..and are selling them...oh well if ur deciding to go turbo soon might as well...do u have msn?

*pdiggitydogg* · 11-20-2002, 09:41 PM

pretty much yeah I thought I had a buyer (someone from here actually, I name no names...you know who you are) but they backed out after they told me they wanted it...I packaged it up and everything...now it just sits in the corner. Hopefully I can get the turbo by summer. If not I will have it by next winter because I'll upgrade the internals first and then turbo it (a much smart way to do it

) Nope no MSN...I am totally against microsoft and only use it as an OS becuase I really dont have a choice...I have AIM though for chat and use comcast as my service provider (cable baby oh yeah)

ShEaNy · 11-20-2002, 10:00 PM

damn....i have msn....thats it...i hate the PMing..no offence to HS....but my internet is retarded....but i know some kid that might want it here...ill ask him

*pdiggitydogg* · 11-20-2002, 10:20 PM

yeah I hate PMing to...its too much work...you get an email click it and it takes you to your box then you gotta click to read it then you gotta click again to reply too much work
sweet, let me know if they want it, or get them into contact with me. appreciated

ShEaNy · 11-21-2002, 01:09 AM

do u have any pics of it?

slowEJ6 · 11-21-2002, 01:47 AM

who needs a downpipe, just run that baby straight off the turbo!

*pdiggitydogg* · 11-21-2002, 08:07 AM

pics...no...but I figure its brand new so this one from the manufacturer should be ok...retail for it is $310 but if I can get $130 or somewhere around that I'd be real happy

11-21-2002, 08:55 AM

Quote:

Originally posted by ShagginJet
I think AzCivic is correct...

Hey Ditty, it all depends on how you do it. You can't get a specific down pipe unless you have the rest of the setup. Depending on what turbo you have the pipe may need to be different. depending on what exhaust manifold you use, it'll effect the position of the pipe. Also, how you mount the turbo, size of the flange. You have to mount it and then have someone make it, on the spot from scratch. especially if you're going to do a home made.

You really dont need to worry about the position of the manifold affecting the pipes postion too much cause if it is a little off at the converter you can just use a flex pipe to help line it up.

I really wouldnt go with a greddy kit. Dont get me wrong, im not saying that they are bad kits cause they are far from bad, its just that for the money you will be able to get more if you put it together yourself. The basic GReddy kit for the SOHC sells for about $1,400 shipped then of course you're going to add the intercooler which usually costs about $750 shipped so you're looking at about $2,150 right there. For about $200-300 more you can build yourself a turbo kit and get yourself a standalone fuel management system.

I was going to go with a GReddy kit myself for my Si but then I realized it's just way too much money for what you get. The kit for my Si is $2350 shipped the large intercooler is $800 shipped then the Hondata system with computer wiring harness and program is $1100 which puts the total up over $4000 ! I really thought about it and decided that I was going to put the kit together myself and I am glad that I did. Right now I have almost everything that I need to install the kit (just waiting for the turbo to comeback from rebuild and need the piping bent). Below is a list of the parts and what I paid for them...

T-25 Turbo - bought it blown and I just sent it out to be rebuilt and upgraded to a T-28, cost me $50 plus they are charging $325 for the upgrade
GReddy - Type S Blow Off Valve $180
HKS B series manifold - bought brand new $300
Mitsubishi Starion intercooler - bought it for $100 and then cost me $75 to modifiy the end tanks
Minekie - is bending all my pipes and making my downpipe cost is $400
Miscellaneous - fittings, oil and water feed lines, gaskets $150
Hondata - complete with ECU ODBII to OBDI harness datalogging $1200
Mitsubishi - 450cc injectors $100
Total - $2,880

I am sure that at the time of the install I might find something else that I may need but as of right now thats the total. Much better than $4,000+ I would spend going with a greddy kit I think.

I think its much better to go this route, not only to save yourself money but for less money you can build yourself a better kit, and its a good learning experience. Going this route forces you to learn how things work which will help when something goes wrong.

11-20-2002, 12:43 AM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Turbo downpipe Ive been thinking of the custom turbo that I want to do but is there a way to just buy a downpipe for my civic? Ive looked everywhere but cant find any at all. All I can think of is custom fabrication...but I dont know where to get that done. I dont think Midas or Minekie does that do they?

11-20-2002, 01:43 AM	#5
armyguy5 3rd Gear Join Date: Oct 2002 Location: allendale, mi Age: 42 Posts: 568	go to a machine shop....they'll do it..just give em the specs chris __________________ Cold Air Intake, Front Strut Bar, MTX Thunder 6000 10", Gunmetal Altezza Tail Lights, Short Throw Shifter, Factory Side Skirts and Rear lip, JDM front Lip, Thermal R&D stealth exhaust, 16" Rota Slipstreams in Bronze, Alpine CD/MP3/WMA/XM RADIO, Legacy L7M in car video

11-20-2002, 06:48 PM	#9
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	I think AzCivic is correct... Hey Ditty, it all depends on how you do it. You can't get a specific down pipe unless you have the rest of the setup. Depending on what turbo you have the pipe may need to be different. depending on what exhaust manifold you use, it'll effect the position of the pipe. Also, how you mount the turbo, size of the flange. You have to mount it and then have someone make it, on the spot from scratch. especially if you're going to do a home made. __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

11-20-2002, 08:40 PM	#10
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	right yeah i figured it was all specific...it was just a general wondering

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-20-2002, 12:55 AM	#2
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 41 Posts: 3,821	umm what do u plan on doing with this downpipe....without a turbo installed...?

11-20-2002, 01:06 AM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	um...its for when the turbo is installed...eventually. all I know is its 2am and im still up on my computer wonding about downpipes and turbos

11-20-2002, 01:18 AM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	see im too tired to even spell right...wonding...wtf...w-o-n-d-e-r-i-n-g...there...I think I should go to bed now....:o

11-20-2002, 11:53 AM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Well thats a suprise to me...I'll have to find a good one though...the one by my house is full of idiots that dont have a clue

11-20-2002, 09:26 PM	#11
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 41 Posts: 3,821	id wait till u get a turbo first....then ull know EXACTLY what type u need....just my 2 bucks worth..lol.....and about ur headers in ur sig....y not install them now since its not turbo?

11-20-2002, 09:33 PM	#12
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	'cause I dont want to make them used headers. I want them to be new so I can sell the stupid thing. why I bought it I have no idea probably just thought it'd be a good idea at the time Oh and the dp is gonna be the last thing I get..hell more than likely I'll just get the greddy kit just because im so lazy

11-20-2002, 09:36 PM	#13
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 41 Posts: 3,821	lol....so u bought them said...what the hell..and are selling them...oh well if ur deciding to go turbo soon might as well...do u have msn?

11-20-2002, 09:41 PM	#14
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	pretty much yeah I thought I had a buyer (someone from here actually, I name no names...you know who you are) but they backed out after they told me they wanted it...I packaged it up and everything...now it just sits in the corner. Hopefully I can get the turbo by summer. If not I will have it by next winter because I'll upgrade the internals first and then turbo it (a much smart way to do it ) Nope no MSN...I am totally against microsoft and only use it as an OS becuase I really dont have a choice...I have AIM though for chat and use comcast as my service provider (cable baby oh yeah)

11-20-2002, 10:00 PM	#15
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 41 Posts: 3,821	damn....i have msn....thats it...i hate the PMing..no offence to HS....but my internet is retarded....but i know some kid that might want it here...ill ask him

11-20-2002, 10:20 PM	#16
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	yeah I hate PMing to...its too much work...you get an email click it and it takes you to your box then you gotta click to read it then you gotta click again to reply too much work sweet, let me know if they want it, or get them into contact with me. appreciated

11-21-2002, 01:09 AM	#17
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 41 Posts: 3,821	do u have any pics of it?

11-21-2002, 01:47 AM	#18
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 43 Posts: 3,195	who needs a downpipe, just run that baby straight off the turbo!