.:HSTuners::

12-03-2002, 01:19 AM

Hello all, I have some things I think you all could put to some better uses than I so heres what I can remember; B18B1(ls) good bottom end
B18C5 (typeR) good head, cams, cover,
B18C5 bottom end, had rod knock, pistons good
Stock cat. back exhaust, intake manifold(less t-body), DC 4 to 1 header, (1) new cold air, (1)high volicty intakes, flywheels, clutch plates/covers,4 puck disc, transmission, all for B18C5
(2) LS intake manifolds both with t-bodys, injectors, and wiring harnesses.
(4) swept gsr wheels, (2) wide five gsr wheels all scuffed unknown condition.
I know I have more just can't remember all of it. I have all but the ECU, dist., and some other assorted parts to make a high compression Frankenstein!

Now here is the deal, I am not seperating anything you want one you get it all! The price one new unused Clarion Model# VRX925VD or $2500.00 What a deal! If your interested I have some pictures or can take some for you and can set up or deliver.
E-mail me as I need to get rid of it all! theredbeast@msn.com
I have pictures!
http://community.webshots.com/album/55784148DdyFWO

ShEaNy · 12-03-2002, 12:58 PM

are u hbasically selling an engine...or almost all the parts to one..seperatly(apart).... but all together as one price???? ....

12-03-2002, 01:38 PM

Basiclly you can do a few things with the parts that I have. I will tell you what my plan was going to be, well no I'll tell you what could be done . You could keep the good LS bottom end together put the typeR head on it with the trans. and misc. parts and have a "reliable" frankenstine with a LSD. or you could take the bad typeR bottom end apart and the rods out of the good LS bottom end and put the typeR pistons on the LS rods back into the LS block, place the typeR head onto the LS bottom end and have one hell of an all motor car. With about(i have yet to do the measurments so bear with me) a true 11.1 comp ratio. And a LSD diff. all the hardware for a '94 and later Integra. Cool stuff.

Hope that explanes it abit better for ya. Look at the link too.

ShEaNy · 12-03-2002, 07:36 PM

yup i have a headache now trying to read and understand that but i think i have it..but one thing...list the bottoms AND HEADs ur selling cause it sounded like u have a LS bottom and A type R bottom and some head....im tired right now

12-03-2002, 08:21 PM

Yep, total of one typeR motor, which has a bad rod/crank
And one good LS lower end. You got it!

12-10-2002, 08:46 PM

how much are u selling the type r head?

01-07-2003, 06:29 AM

wassup man im from nyc im interested in buying it all can u make a deal with me email me at gsr92vtec@aol.com

12-03-2002, 01:19 AM	#1
Greasemonkey75 Posts: n/a	Clean out the garage. Hello all, I have some things I think you all could put to some better uses than I so heres what I can remember; B18B1(ls) good bottom end B18C5 (typeR) good head, cams, cover, B18C5 bottom end, had rod knock, pistons good Stock cat. back exhaust, intake manifold(less t-body), DC 4 to 1 header, (1) new cold air, (1)high volicty intakes, flywheels, clutch plates/covers,4 puck disc, transmission, all for B18C5 (2) LS intake manifolds both with t-bodys, injectors, and wiring harnesses. (4) swept gsr wheels, (2) wide five gsr wheels all scuffed unknown condition. I know I have more just can't remember all of it. I have all but the ECU, dist., and some other assorted parts to make a high compression Frankenstein! Now here is the deal, I am not seperating anything you want one you get it all! The price one new unused Clarion Model# VRX925VD or $2500.00 What a deal! If your interested I have some pictures or can take some for you and can set up or deliver. E-mail me as I need to get rid of it all! theredbeast@msn.com I have pictures! http://community.webshots.com/album/55784148DdyFWO

01-07-2003, 06:29 AM	#7
b17hatch Posts: n/a	ill buy it all wassup man im from nyc im interested in buying it all can u make a deal with me email me at gsr92vtec@aol.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-03-2002, 12:58 PM	#2
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 41 Posts: 3,821	are u hbasically selling an engine...or almost all the parts to one..seperatly(apart).... but all together as one price???? ....

12-03-2002, 01:38 PM	#3
Greasemonkey75 Posts: n/a	Basiclly you can do a few things with the parts that I have. I will tell you what my plan was going to be, well no I'll tell you what could be done . You could keep the good LS bottom end together put the typeR head on it with the trans. and misc. parts and have a "reliable" frankenstine with a LSD. or you could take the bad typeR bottom end apart and the rods out of the good LS bottom end and put the typeR pistons on the LS rods back into the LS block, place the typeR head onto the LS bottom end and have one hell of an all motor car. With about(i have yet to do the measurments so bear with me) a true 11.1 comp ratio. And a LSD diff. all the hardware for a '94 and later Integra. Cool stuff. Hope that explanes it abit better for ya. Look at the link too.

12-03-2002, 07:36 PM	#4
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 41 Posts: 3,821	yup i have a headache now trying to read and understand that but i think i have it..but one thing...list the bottoms AND HEADs ur selling cause it sounded like u have a LS bottom and A type R bottom and some head....im tired right now

12-03-2002, 08:21 PM	#5
Greasemonkey75 Posts: n/a	Yep, total of one typeR motor, which has a bad rod/crank And one good LS lower end. You got it!

12-10-2002, 08:46 PM	#6
jdmeg Posts: n/a	how much are u selling the type r head?