.:HSTuners::

09-30-2001, 10:00 PM

Looking to install this JDM steering wheel I got offa Ebay but it doesnt have a spot for the CC!. Any suggestions on how to go about relocating the CC? I was thinking about using the 2 extra horn buttons on the bottom 2 spokes of the JDM wheel as the controls or maybe transplant the CC unit onto the JDM wheel. If I do the second this will most probably require some cutting of the JDM wheel. Trying to avoid that. I don't want to go the cheapo route of using aftermarket switches ala JC Whitney. Any of you guys with an AM wheel still got your CC? I once thought I saw a Momo hub adapter that would allow you to keep the CC on AM wheels but I dont think that would work on the JDM wheel since the main difference is that the JDM wheel lacks an airbag and has 2 extra horn buttons. Any suggestions?

*ChrisCantSkate* · 10-01-2001, 01:54 PM

im sure you could do it, cause the cruse controls are just buttons anyways.

10-02-2001, 12:03 AM

You guys want to learn how to take out the Cruise Control as a whole?

10-02-2001, 12:10 AM

No! Want to keep it. I go on long trips a lot.

11-02-2001, 11:08 PM

Got it installed. Had to create a template from the old steering wheel where the CC was and cut into the JDM one. Had to epoxy the CC to the new opening but I took my time and it turned out sweeeeeeet! No more ugly airbag!

09-30-2001, 10:00 PM	#1
grumblemarc Posts: n/a	Relocate CC? Looking to install this JDM steering wheel I got offa Ebay but it doesnt have a spot for the CC!. Any suggestions on how to go about relocating the CC? I was thinking about using the 2 extra horn buttons on the bottom 2 spokes of the JDM wheel as the controls or maybe transplant the CC unit onto the JDM wheel. If I do the second this will most probably require some cutting of the JDM wheel. Trying to avoid that. I don't want to go the cheapo route of using aftermarket switches ala JC Whitney. Any of you guys with an AM wheel still got your CC? I once thought I saw a Momo hub adapter that would allow you to keep the CC on AM wheels but I dont think that would work on the JDM wheel since the main difference is that the JDM wheel lacks an airbag and has 2 extra horn buttons. Any suggestions?

10-01-2001, 01:54 PM	#2
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 41 Posts: 9,662	im sure you could do it, cause the cruse controls are just buttons anyways. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-02-2001, 12:03 AM	#3
VN-Tec Posts: n/a	You guys want to learn how to take out the Cruise Control as a whole?

10-02-2001, 12:10 AM	#4
grumblemarc Posts: n/a	No! Want to keep it. I go on long trips a lot.

11-02-2001, 11:08 PM	#5
grumblemarc Posts: n/a	Got it installed. Had to create a template from the old steering wheel where the CC was and cut into the JDM one. Had to epoxy the CC to the new opening but I took my time and it turned out sweeeeeeet! No more ugly airbag!