.:HSTuners::

01-26-2002, 08:10 AM

who in your opinions makes the best pulleys?

It"s time to start working under the hood and I think after the cold air intake this is the next best place to go.

*KwikR6* · 01-26-2002, 09:52 AM

From what I understand.....most underdrive pulley's work the same. No one company makes a better one. I could be completely wrong, and if I am....Sorry. But I think it just depends on what color you want.

01-26-2002, 10:15 PM

Ok Dude, I'm not speaking from experience here, but I heard that the underdrive pulley for the crank is a pain in the butt to install, and you pretty much need to pull the engine to get it on. I've also heard that that's the only pulley with which you would see actual gains, like 2 hp at most, on the dyno, thats with the water pump pulley and alternator too. I wouldn't spend my time pulling the engine just for the pulleys, I'd put that money toward a catback, and wait for a time when you're doing some major engine work to slap on those pulleys. They do look damn good though...

Whatever you want though, its your car.

94_AcCoRd_EX · 01-26-2002, 10:21 PM

I have the set of AEM pulleys. They don't do a whole lot, but they may help the bottom end a little.

The AEM set is a "safer" way to go. It just deals with the power steering and alternator pulleys. The UR changes the crank pulley, and I don't believe that it incorporates a harmonic balancer (Someone verify this? There has been contraversy about that). The UR set gains much more power than the AEM set though.

If you really just have a CAI, I'd recommend getting an exhaust next. The gains will be much better. I have just a CAI and pulleys, and I'd rather have an exhaust.

01-26-2002, 10:37 PM

are you guys serious!! i heard that they helped you a lot

94_AcCoRd_EX · 01-27-2002, 11:19 AM

Quote:

Originally posted by alpine3069
are you guys serious!! i heard that they helped you a lot

The UR set will help much more than the AEM set. On exception is that one guy with a V6 Accord on another board dynoed 10 hp gain with the AEM set. Pulleys are something to do after I/H/E IMHO.

*KwikR6* · 01-27-2002, 05:52 PM

Quote:

It"s time to start working under the hood and I think after the cold air intake this is the next best place to go.

Quote:

Originally posted by 94_AcCoRd_EX
Pulleys are something to do after I/H/E IMHO.

I gotta agree Accord...Take some time and put a nice header and some exhaust before anything. You'll notice more if you do that then spending money on pulleys IMO??? I honestly think wait a while to put on the pulleys.

94_AcCoRd_EX · 01-27-2002, 05:53 PM

Quote:

Originally posted by dereks civic
I honestly think wait a while to put on the pulleys.

Yeah, learn from my mistake. I put them on after just a CAI, and I think it was a waste of money. I should have put the money toward an exhaust.

*KwikR6* · 01-27-2002, 05:56 PM

Quote:

Originally posted by 94_AcCoRd_EX

Yeah, learn from my mistake. I put them on after just a CAI, and I think it was a waste of money. I should have put the money toward an exhaust.

And besides....I just don't see the point untill your doing serious werk to your engine.

01-29-2002, 02:25 PM

thanx guys I think I will go to the exhaust / header for more power next.

94_AcCoRd_EX · 01-29-2002, 04:06 PM

Quote:

Originally posted by james_willson1
thanx guys I think I will go to the exhaust / header for more power next.

Excellent choice

01-29-2002, 04:11 PM

Hey all, I am actually in the process of installing the AEM Pulleys on my Civic, but I'm having some trouble with the power steering pulley. I got the belt off and all, and we thought that we had loosened the bolt that holds the stock pulley on, but after literally a half hour of supposedly unscrewing it we realized that we were getting nowhere. The bolt does turn, but it doesn't seem to be making any progress towards coming off. Is the screw stripped, or is there something I'm just missing? Thanks...

01-29-2002, 07:48 PM

they say that they increase you throttle response? will it do that? because in my car it seems to hesate a little

01-29-2002, 09:22 PM

well, i've seen many people including my buddy buy these pulleys then after like 3-4 months, they take em off and put back the oem ones. there's really not much power gain w/ these so im not a big fan and will never buy...

94_AcCoRd_EX · 01-29-2002, 10:07 PM

Quote:

Originally posted by Giddings
Hey all, I am actually in the process of installing the AEM Pulleys on my Civic, but I'm having some trouble with the power steering pulley. I got the belt off and all, and we thought that we had loosened the bolt that holds the stock pulley on, but after literally a half hour of supposedly unscrewing it we realized that we were getting nowhere. The bolt does turn, but it doesn't seem to be making any progress towards coming off. Is the screw stripped, or is there something I'm just missing? Thanks...

Welcome to HS.

That's strange that it just keeps spinning. There is a chance that its stripped. Did you use an impact wrench to loosen it?

*KwikR6* · 01-29-2002, 11:41 PM

Quote:

Originally posted by 94_AcCoRd_EX

Welcome to HS.

That's strange that it just keeps spinning. There is a chance that its stripped. Did you use an impact wrench to loosen it?

yeah that's what i was thinking?

01-26-2002, 08:10 AM	#1
james_willson1 Posts: n/a	underdrive pulleys who in your opinions makes the best pulleys? It"s time to start working under the hood and I think after the cold air intake this is the next best place to go.

01-26-2002, 09:52 AM	#2
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 45 Posts: 8,871	From what I understand.....most underdrive pulley's work the same. No one company makes a better one. I could be completely wrong, and if I am....Sorry. But I think it just depends on what color you want. __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

01-26-2002, 10:21 PM	#4
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	I have the set of AEM pulleys. They don't do a whole lot, but they may help the bottom end a little. The AEM set is a "safer" way to go. It just deals with the power steering and alternator pulleys. The UR changes the crank pulley, and I don't believe that it incorporates a harmonic balancer (Someone verify this? There has been contraversy about that). The UR set gains much more power than the AEM set though. If you really just have a CAI, I'd recommend getting an exhaust next. The gains will be much better. I have just a CAI and pulleys, and I'd rather have an exhaust. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-26-2002, 10:15 PM	#3
SupaSlowCivicDX Posts: n/a	Ok Dude, I'm not speaking from experience here, but I heard that the underdrive pulley for the crank is a pain in the butt to install, and you pretty much need to pull the engine to get it on. I've also heard that that's the only pulley with which you would see actual gains, like 2 hp at most, on the dyno, thats with the water pump pulley and alternator too. I wouldn't spend my time pulling the engine just for the pulleys, I'd put that money toward a catback, and wait for a time when you're doing some major engine work to slap on those pulleys. They do look damn good though... Whatever you want though, its your car.

01-26-2002, 10:37 PM	#5
alpine3069 Posts: n/a	are you guys serious!! i heard that they helped you a lot

01-29-2002, 02:25 PM	#10
james_willson1 Posts: n/a	thanx guys I think I will go to the exhaust / header for more power next.

01-29-2002, 04:11 PM	#12
Giddings Posts: n/a	Hey all, I am actually in the process of installing the AEM Pulleys on my Civic, but I'm having some trouble with the power steering pulley. I got the belt off and all, and we thought that we had loosened the bolt that holds the stock pulley on, but after literally a half hour of supposedly unscrewing it we realized that we were getting nowhere. The bolt does turn, but it doesn't seem to be making any progress towards coming off. Is the screw stripped, or is there something I'm just missing? Thanks...

01-29-2002, 07:48 PM	#13
alpine3069 Posts: n/a	they say that they increase you throttle response? will it do that? because in my car it seems to hesate a little

01-29-2002, 09:22 PM	#14
SWIFT Posts: n/a	well, i've seen many people including my buddy buy these pulleys then after like 3-4 months, they take em off and put back the oem ones. there's really not much power gain w/ these so im not a big fan and will never buy...