When good master cylinders go bad...went to track tonight

I went to Cecil County Dragway for grudge night and had a little scary experience. I was in my teg and right as i got to the track I went right in with no problems and put on my slicks. i went into the lanes and got teched in and im thinking that everything is going too good. So anyway i reach down to my Profec and give the high boost knob a little turn to the right. I fugure the more boost the better right. WRONG I toasted the 24.5 MT ETS to peices through first launching at 6.5K and ripped second only to hear the slicks make a quick bark again. Finally i got some traction and im flying and I know its a good run but when I go to pull 4th the gear its not there. I didnt grind it just hit a stop and wouldnt go in. I tried to hit 5th then back to back to 4th but no go. Anyway heres my slip. You can tell I had a good run but it just wasnt my day. I took the car into the pits and our diagnosis is a broke master cylinder becasue it is leaking oil onto my floor. I think I may possibly have a bent shift fork also. Oh well your not racing unless you break stuff.


60'.........1.886
330........5.249
1/8.........7.950
mph.......93.29
1000.....10.261
1/4........12.464
mph.......98.38