.:HSTuners::

JDMFantasy2k · 04-22-2004, 10:06 PM

Well my exhaust finaly came in after waiting over a month, and come to find out, they shiped the wrong one! BUT, it happens to be the RS-R ex mag, GT2 system, so instead of being a bitch i'm just keepin it, and i like it. So i install it (about 2 hours) and the pipe itself hangs kinda low. So i was wondering if anyone else has this exhaust or one similar (N1 style) and if you ran into this problem and how you overcame it. The only thing i can think of is a custom hanger. I shall post pics one i get the digi workin

*pdiggitydogg* · 04-22-2004, 10:11 PM

you could have the hanger mounts shortened (or do it yourself)
or get rubber hangers that are shorter

Id do the first

JDMFantasy2k · 04-22-2004, 10:44 PM

hmm good idea, however it seems that the middle of the pipe hangs too much, but i'll just have someone figure it out when its in the shop.

ebpda9 · 04-23-2004, 09:16 PM

my accord does that too with the stock hangers on it. the teg which has some univeral hangers (look like ropes) it's sitting up nice and tight

*pdiggitydogg* · 04-23-2004, 09:42 PM

you could just get some getto steel straps and pull it up higher

thermal · 04-25-2004, 07:22 AM

as pdogg said, shorter rubber hangers. I had to do that to my 3" thermal. A quick trip to the junkyard and all of a sudden, 4 short rubber hangers appear in my back pocket......

04-25-2004, 07:04 PM

Hey, post ur pics in the "exhaust Info" stickey i made

.

04-22-2004, 10:06 PM	#1
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	My Exhaust Well my exhaust finaly came in after waiting over a month, and come to find out, they shiped the wrong one! BUT, it happens to be the RS-R ex mag, GT2 system, so instead of being a bitch i'm just keepin it, and i like it. So i install it (about 2 hours) and the pipe itself hangs kinda low. So i was wondering if anyone else has this exhaust or one similar (N1 style) and if you ran into this problem and how you overcame it. The only thing i can think of is a custom hanger. I shall post pics one i get the digi workin __________________

04-22-2004, 10:44 PM	#3
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	hmm good idea, however it seems that the middle of the pipe hangs too much, but i'll just have someone figure it out when its in the shop. __________________

04-23-2004, 09:16 PM	#4
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	my accord does that too with the stock hangers on it. the teg which has some univeral hangers (look like ropes) it's sitting up nice and tight __________________

04-25-2004, 07:22 AM	#6
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	as pdogg said, shorter rubber hangers. I had to do that to my 3" thermal. A quick trip to the junkyard and all of a sudden, 4 short rubber hangers appear in my back pocket...... __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-22-2004, 10:11 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	you could have the hanger mounts shortened (or do it yourself) or get rubber hangers that are shorter Id do the first

04-23-2004, 09:42 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	you could just get some getto steel straps and pull it up higher

04-25-2004, 07:04 PM	#7
cashizslick Posts: n/a	Hey, post ur pics in the "exhaust Info" stickey i made .