.:HSTuners::::Hondas Wanted:: |
![]() |
#1 |
Posts: n/a
|
b20 bottom end
Hey guys i need to replace the bottom end off my engine its a d16 right now and i was wondering if i could put a b20 bottom end with a d16 head?
|
![]() |
![]() |
#2 |
Moderator
Join Date: Feb 2002
Location: Az
Age: 44
Posts: 3,804
|
no, you can only use a d series block. How much money do you got? If you want the ultimate d series bottom end look here:
http://www.exospeed.com/engine/dseriesraceblocks.htm scroll down to the stage 4. If you plan on forced induction you can go with a 77mm bore (adds about a tenth of a liter of displacement) and can withstand a major amount of boost. |
![]() |
![]() |
![]() |
#3 |
Posts: n/a
|
Only B series parts are interchangeable, same with D series, H series, F series etc.
|
![]() |
![]() |
#4 |
Moderator
Join Date: Feb 2002
Location: Az
Age: 44
Posts: 3,804
|
some F and H series stuff is interchangeable
|
![]() |
![]() |
![]() |
#5 |
Posts: n/a
|
I don't believe any internal parts are interchangeable, but I may be wrong since I've never tried it, but I'm sure there are some parts that are. Hell, even my TB from my D16Z6 fit my B16 when I broke the TPS installing it :o
|
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|