.:HSTuners::

CD5Passion · 07-02-2003, 11:56 AM

so I've been trying to figure out just exactly how you would go about removing the headlights, in instance to exchange them for projectors.
I don't yet have them but I'd just like to know.
So far I've found quite a few bolts and it looks as if you may have to even remove the bumper as a few of these are located under the body of the headlight itself, blocked by thy bumper
if anyone has any ideas I would appreciate the help

ebpda9 · 07-02-2003, 12:01 PM

yeah you will need to remove the bumper and grill too (at least on a 90-93

CD5Passion · 07-02-2003, 12:09 PM

accords are impossible....lol whatever adds for fun times and getting dirty

07-03-2003, 06:14 PM

theres 2 screws under ur wheels, and you have to get a extender for the wrench to get to the 2 bulbs under the headlights

CD5Passion · 07-04-2003, 12:07 PM

bulbs? you mean screws or bolts?

07-04-2003, 01:52 PM

screws

07-09-2003, 11:55 AM

Ok, heres what you have to do.
1. Pop the hood and remove the 5 screw that holds the upper grill in place and then remove the grill.
2. There is a screw in the fender well right where the bumper ends. You can see it if you move the fender lining. So unscrew that. You have to do the same thing for the other side.
3. Remove your turn signal lense and you will see 2 bolts on each side that holds the beam. I think you use a 12mm wrench and unscrew those on both sides.
4. The bumper is removed, it is easy to go from there.

PM me if you have any problems.

CD5Passion · 07-09-2003, 08:15 PM

thanks alot for the detail instructions, u da man

07-02-2003, 11:56 AM	#1
CD5Passion Registered User Join Date: Nov 2002 Location: Santa Barbara, California Age: 39 Posts: 5,446	Remove Headlights so I've been trying to figure out just exactly how you would go about removing the headlights, in instance to exchange them for projectors. I don't yet have them but I'd just like to know. So far I've found quite a few bolts and it looks as if you may have to even remove the bumper as a few of these are located under the body of the headlight itself, blocked by thy bumper if anyone has any ideas I would appreciate the help __________________

07-02-2003, 12:01 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	yeah you will need to remove the bumper and grill too (at least on a 90-93 __________________

07-02-2003, 12:09 PM	#3
CD5Passion Registered User Join Date: Nov 2002 Location: Santa Barbara, California Age: 39 Posts: 5,446	accords are impossible....lol whatever adds for fun times and getting dirty __________________

07-04-2003, 12:07 PM	#5
CD5Passion Registered User Join Date: Nov 2002 Location: Santa Barbara, California Age: 39 Posts: 5,446	bulbs? you mean screws or bolts? __________________

07-09-2003, 08:15 PM	#8
CD5Passion Registered User Join Date: Nov 2002 Location: Santa Barbara, California Age: 39 Posts: 5,446	thanks alot for the detail instructions, u da man __________________

07-03-2003, 06:14 PM	#4
02black_Accord Posts: n/a	theres 2 screws under ur wheels, and you have to get a extender for the wrench to get to the 2 bulbs under the headlights

07-09-2003, 11:55 AM	#7
rhdune16 Posts: n/a	Ok, heres what you have to do. 1. Pop the hood and remove the 5 screw that holds the upper grill in place and then remove the grill. 2. There is a screw in the fender well right where the bumper ends. You can see it if you move the fender lining. So unscrew that. You have to do the same thing for the other side. 3. Remove your turn signal lense and you will see 2 bolts on each side that holds the beam. I think you use a 12mm wrench and unscrew those on both sides. 4. The bumper is removed, it is easy to go from there. PM me if you have any problems.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode