.:HSTuners::::Hondas Wanted:: |
![]() |
#1 |
Posts: n/a
|
![]() Car Parts:
1. 94-97 Accord Custom VTEC head, KG Precision head, Stage 5 P&P, SSI Valves and retainers: Cost $1600 to have done, asking $1000, has only 5k 2. 94-97 Accord Fully built bottom end. Cylinder #2 and #3 needs to be re-honed very very slightly because of light schoring. The bottom end consists of Aris 8.5 : 1 Forged Pistons, Crower Rods, Golden Eagle “Godzilla” Sleeves. Not much to get the work done being that the block is already out, or if you know what you doing. This block alone cost $2300 to have completely done. I am asking $1400 because of the work. 3. Accord JDM Manual Transmission, Cryogenically Treated, Red line oils and lubricants: $1000. I will include a Stage 4 Clutchmasters Clutch with the lightened flywheel for $1400 4. 94-97 Accord EX (Vtec) Manual Computer: $100 5. 94-97 Accord Toupe Stock Seats with Power Driver: $300 Local 6. 94-95 Accord Carbon Fiber Tail lights: $35 7. 94-97 Accord Euro Clear Sidemarkers, with red japan bulbs: $10 8. 94-97 Accord Stock Headlights, MINT: $100 9. 94-97 Accord Custom Piaa projector headlights: $175 10. 94-97 Blitz Blue Class bumper with mesh: $175 Local 11. 94-97 Accord stock tape deck: Make offer 12. Crane Fireball Hi-6 ignition, Nology Pro-Fire coil, New Distributor (for the Vtec accord) with MSD distributor cap: $390 13. 94-97 Red Nology Hot-Wires with independent grounds: $100 14. 90-97 Accord Stock Springs: Make offer 15. Accord Ignition Wires: Make offer 16. Accord Vtec Distributor: Make offer 17. Accord Fuel Rail painted red: Make offer 18. Accord Alternator: Make offer 19. Accord Alternator Pully painted red: Make offer 20. Accord Crank Pully: Make offer 21. Accord Horn: Make offer 22. Accord A/C compressor: $250 23. Accord A/C lines: Make offer 24. Accord (possibly others) AEM Silver Fuel Rail: $85 25. Accord (possibly others) AEM Red Tru-power Pullies with belt: $100 26. Accord (possibly others) Unortodox Racing Underdrive Crank pully: $190 27. Accord (possibly others) Unortodox Racing Ultra Tr Race Adjustable Cam Sprocket: $200 28. Accord Blue SMACCO Performance Radiator Hoses: $50 29. 95-97 V6 Accord Gauge cluster, can be used for parts for other model accords: $60 30. 90-97 Accord 1 Rear KYB AGX strut, BRAND NEW: Make offer 31. 94-97 Accord 4 cyl, 1 Rear Power stop cross drilled rotor, BRAND NEW: Make offer 32. 94-97 Accord 4 cyl, 1 Rear Stock Rotor: Make offer 33. Accord Front stock rotors: Make offer 34. Accord PBR Metal Masters Performance break pads, NEW: $75 35. Accord Stock front and rear breaks: Make offer 36. Accord (possibly others) 1 Set of rear Goodridge SS break lines, BRAND NEW: Make offer 37. 4 Red 10” neons: $50 38. 2 Purple 10” neons: $20 39. Sony Graphic EQ (missing the wiring harness): $75/obo 40. 6x8 Infinity References, MINT: $65 41. Panasonic In-dash DVD with A/V control unit, MINT: $1050 42. 550cc RC Engineering Injectors: $260 43. APEXI Super AVC-R (black jdm one): $275 44. Greddy 52mm White EGT Gauge: $130 45. Autometer 52mm A/F Gauge: $30 46. New Red “Powered by Honda” Shoulder pads: $10 47. Brand new H4 Hiper Industries Super Plazma Xenon Bulbs: $20 48. 98-99 Maxima SE 7 Color White face gauges: $20 49. Polarg Hyper white 194 bulbs, 3 Pair: $8 a pair 50. Polarg Hyper white 7440 bulbs: $15 51. Stock 9006 Headlight bulbs: Make offer 52. Stock 9005 Headlight bulbs: Make offer 53. Motegi Tuner Lug nuts with key, in chrome: $50 54. 87-89 T-Bird GTO Black out headlight covers: $25 55. Bundy II Alto Saxophone: $600 56. Nokia 3360 with OEM Case, aftermarket face, home/car charger, leather case: $75 57. Prelude Red Valve cover: $90 F22B1 2.2L Vtec Turbo Set up: 1. Turbonetics T3/T04E turbo, Stage 3 Turbine, 50 Trim, .63 A/R 2. Iceman Exhaust Manifold 3. Custom 2 7/8” Downpipe 4. MHI IC with all the piping, Intake to IC, IC to turbo 5. 42mm Red Tial wastegate 6. 50mm Red Tail BOV 7. Turbonetic T-clamps (not cheap at all) 8. Turbonetic Couplings 9. Paxton 12:1 FMU 10. Greddy 52mm White face boost gauge 11. Carbon fiber single pod (double if you purchase the EGT Gauge with the set up) 12. SS Oil feed/return lines 13. Oil Catch can Asking $2300 for the entire set up. This is everything you will need to get your 2.2L boosting. Pictures are available upon request, everything must go! |
![]() |
![]() |
#2 |
Posts: n/a
|
For the injectors, you want 250 for all of them I am guessing? Right?
|
![]() |
![]() |
#3 | |
Posts: n/a
|
Quote:
yes, that is correct, all 4 for 250 |
|
![]() |
![]() |
#4 |
Posts: n/a
|
A ton more parts will be added here soon because I am purchasing the car back from my insurance company. Here are some of the after market parts that were on the vehicle that are still on it:
>JDM H22a DOHC Vtec (25k) >H22a tranny and clutch (25k) >Fluidyne Radiator (dented very slightly on the rear section of the radiator) INTERIOR >Factory toupe ( tanish grey color ) front/rear seats/dash/carpet >Custom Made Chromoly Roll cage (white cage) >Momo/Neuspeed shift knob (only 5 made) >Momo carbon fiber pedals (red/carbon fiber) >SX Engineering High flow fuel pump with custom fittings, AN-6 SS lines, AN-8 SS lines, and filter (fuel set up when i was boosting) WHEELS/SUSPENSION >Eibach sportline/Koni front & Neuspeed race/kyb agx rear suspension >Power Stop rotors in front and in rear >Goodrich stainless brake lines >Endless breaks >Energy Suspension motor mount >Suspension Techniques anti-sway bars ( f & r ) >OBX top rear strut bar & DC Sports rear lower tie bar EXTERIOR >Red/Clear tail lights >Frost white front bumper with a mesh cut out on below the driver side bumper light Plus a ton of other odds and ins from the car, just let me know what you would be interested in. I don't have the car in my possesion as of this moment, but I will here in the next few days. |
![]() |
![]() |
#5 |
Posts: n/a
|
can u show me a pic of the carbon fiber taillight? and how much u want for the anti sway bar from suspension technique. the rear one only. can u get a pic of that too?
|
![]() |
![]() |
#6 | |
Posts: n/a
|
Quote:
the carbon fiber tails have been spoken for pending payment, the sway bar i have to wait until my car is delieved to be able to give you a picture, but i will keep you updated, thanks ![]() Greg |
|
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2002
Location: Winnipeg, MB
Age: 41
Posts: 3,821
|
K Numbers 24 - 27 Will it Work on my car? what year is it all meant for..
|
![]() |
![]() |
![]() |
#8 | |
Posts: n/a
|
Quote:
it should work for your car, i would have to check it out though. |
|
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2002
Location: Winnipeg, MB
Age: 41
Posts: 3,821
|
please...maybe a deal too if i buy it all ?
![]() ![]() ![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|