.:HSTuners::::Hondas Wanted:: |
03-02-2003, 04:47 PM | #1 |
Posts: n/a
|
alignment question
Everytime I turn sharp my rim hits my tie rod and creates a crunching sound. My rims are half an inch deeper than my last ones so that is what is causing me all this trouble. anyway, my question is, if I swapped tie rods from either side so that the bow in the rod faces towards my strut instead of outward will this be alignable? a buddy of mine says reversing the tie rod will affect the toe-in. I turned the wheel all way to see if the bow in the tie rod was their so it wouldn't hit the strut and this appeared to not be the case. i can't stand having to do 3 point turns just to get into a tight parking space
|
03-02-2003, 05:01 PM | #2 |
Repost Wagon
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
|
i don't think you could put them the other way. you might end up with them hitting the control arm
__________________
|
03-02-2003, 05:06 PM | #3 |
Posts: n/a
|
i turned my wheels all the way to see if that would happen and it appeared their would be enuff clearance if I reversed em.
|
03-02-2003, 05:18 PM | #4 |
Repost Wagon
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
|
there is one more problem: the treads i don't think they will go in
__________________
|
03-02-2003, 05:25 PM | #5 |
Posts: n/a
|
damn, thats tru.....have u heard of some custome tie rods??
|
03-02-2003, 05:37 PM | #6 |
Insomniac Moderator
Join Date: Aug 2001
Location: OR
Age: 43
Posts: 11,142
|
How wide are your wheels? Offset?
__________________
1994 Accord EX coupe --Need hosting for your pics on HST? PM me...-- |
03-02-2003, 06:09 PM | #7 |
Repost Wagon
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
|
no custom tierods. maybe some wheel spacers will help you out a bit
__________________
|
03-02-2003, 06:20 PM | #8 |
Posts: n/a
|
my old wheels were 5 and a half and the new ones are 6
|
03-02-2003, 06:21 PM | #9 |
Posts: n/a
|
i was thinking about wheel spacers.....does anybody sell them?
|
03-02-2003, 06:26 PM | #10 |
Repost Wagon
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
|
the local autoparts stores
__________________
|
03-02-2003, 06:28 PM | #11 |
Posts: n/a
|
damn....one place wants 120 dollars for a spacer....bet I could get a machine shop to make one for 20. btw, how many millimeters are in an inch?
|
03-02-2003, 06:33 PM | #12 |
Repost Wagon
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
|
1"=2.54cm=25.4mm
__________________
|
03-02-2003, 06:37 PM | #13 |
Posts: n/a
|
what is offset?
|
03-02-2003, 06:40 PM | #14 |
Repost Wagon
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
|
__________________
|
03-02-2003, 06:45 PM | #15 |
Posts: n/a
|
thanx.....its positive offset.....can a machine shop offset it any more?
|
Thread Tools | |
Display Modes | |
|
|