.:HSTuners::

blind34_1 · 10-06-2002, 11:12 PM

You'll probably have to get in your trunk and look at the underside of where your stock lights are. You'll probably have a few panels to remove, and then the oh fun task of finding ALL the screws and not losing them. Disconnect the wiring harnesses and try to preserve your bulbs also. Since an 02 accord is a three peice set, you have 33% more work to do also. Good luck.

BTW: what brand of altezzas did you go with? If they are APC or one of their subsidaries, you may have to seal the enclosures with silicone, so moisture doesn't give you grief. I know this is SO true with clear corners and whatnot, because it is VERY noticeable.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

10-06-2002, 11:12 PM	#3
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 40 Posts: 1,813	You'll probably have to get in your trunk and look at the underside of where your stock lights are. You'll probably have a few panels to remove, and then the oh fun task of finding ALL the screws and not losing them. Disconnect the wiring harnesses and try to preserve your bulbs also. Since an 02 accord is a three peice set, you have 33% more work to do also. Good luck. BTW: what brand of altezzas did you go with? If they are APC or one of their subsidaries, you may have to seal the enclosures with silicone, so moisture doesn't give you grief. I know this is SO true with clear corners and whatnot, because it is VERY noticeable.