.:HSTuners::

doownek · 09-30-2002, 11:15 PM

i had a similer problem with my 90 accord ex. my problem was it would not start when it was warm(hot) inside the car..... it turned out to be the main relay, as allready has been menstioned. i took mine out and re-soldered all the joints and its not had a problem since(about a year now) the descriptions are right on as to the location.... heres a site you can look at if ya want tells ya where that relay is(under the cruise control unit)

http://techauto.tripod.com/mainrelaydefine.htm

http://techauto.tripod.com/mainrelaysolder.htm this one tells ya how to solder and drill vent holes..... id did NOT drill the holes, just soldered it all up and it beeen working great ever since.....

everything i had said, has already been said, but hopefully the website helps...

doo

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-30-2002, 11:15 PM	#7
doownek 1st Gear Join Date: Apr 2002 Posts: 41	i had a similer problem with my 90 accord ex. my problem was it would not start when it was warm(hot) inside the car..... it turned out to be the main relay, as allready has been menstioned. i took mine out and re-soldered all the joints and its not had a problem since(about a year now) the descriptions are right on as to the location.... heres a site you can look at if ya want tells ya where that relay is(under the cruise control unit) http://techauto.tripod.com/mainrelaydefine.htm http://techauto.tripod.com/mainrelaysolder.htm this one tells ya how to solder and drill vent holes..... id did NOT drill the holes, just soldered it all up and it beeen working great ever since..... everything i had said, has already been said, but hopefully the website helps... doo