.:HSTuners::

09-24-2002, 02:26 AM

i saw your post on accord... anyway, you have 225s? i would check the clearance from the top of your front tire and the front fender. if you go low enough or bottom out, you'll scrape the fender or worse, especially if you have a heavy load. This guy stopped by at my friends shop asking to lower his 2001 accord, this guys tires where just too wide and stuck out the fender. that's what we told him about getting springs, or get different tires (215,205)

just letting you know

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-24-2002, 02:26 AM	#1
rakugaki Posts: n/a	i saw your post on accord... anyway, you have 225s? i would check the clearance from the top of your front tire and the front fender. if you go low enough or bottom out, you'll scrape the fender or worse, especially if you have a heavy load. This guy stopped by at my friends shop asking to lower his 2001 accord, this guys tires where just too wide and stuck out the fender. that's what we told him about getting springs, or get different tires (215,205) just letting you know