.:HSTuners::

delsolvtec · 09-04-2002, 01:07 PM

Well yesterday marked the end of my engine rebuild. I decided to tear it apart again to throw in Arias forged low compression pistons. I can't believe it fired right up as soon as I was done putting it back together. Blew a little smoke at first but I figured it was just leaked down oil on the cylinder walls from pulling and installing pistons. Now the break in process.

If you remember I put total seal rings and a thicker head gasket a few weeks ago, then pulled it apart again. Hopefully this time it's bulletproof. Intercooler should be here Friday and VAFC should arrive today.

09-04-2002, 01:07 PM	#32
delsolvtec Del Sol Forum Moderator Join Date: Aug 2002 Location: West Chicago IL Age: 49 Posts: 594	Well yesterday marked the end of my engine rebuild. I decided to tear it apart again to throw in Arias forged low compression pistons. I can't believe it fired right up as soon as I was done putting it back together. Blew a little smoke at first but I figured it was just leaked down oil on the cylinder walls from pulling and installing pistons. Now the break in process. If you remember I put total seal rings and a thicker head gasket a few weeks ago, then pulled it apart again. Hopefully this time it's bulletproof. Intercooler should be here Friday and VAFC should arrive today. __________________ 1994 Mazda MX6 - For Sale 1995 Civic Hatch - Coming Soon

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode