.:HSTuners::::Hondas Wanted:: |
06-22-2002, 02:34 AM
|
#1 |
|
Registered User
Join Date: Apr 2002
Location: Calgary, AB Canada
Age: 40
Posts: 2,962
|
76 Corvette vs. Eagle Talon
Well, my friend is 17 and owns a 1976 Chevy Corvette. it is auto with a 350 4 carb under the hood. He just got rebuilt a new engine and bored it and did a bunch of sh*t to it also. He has edlebrock everythings on it as well as a snazzy new metallic red paint job. It looks sharp. Anyways, he just got it insured tonite and i saw him driving so we went to my house and i jumped in with him. We pull up to this 1990 or 1991 Eagle Talon 5 spd. Everyone in town knows this car has alot done to it and everyone has also heard that it has been beaten and bagged and that the engine is ready to blow. (neon lights, stereo, rimes, tires, exhaust, headers, etc.) Anyways, we pull up to him at a red light and we both take off nice and easy, then all of a sudden both of us are right beside eachother going a lot faster. I just expected us to kick the talons ass...no sir..his turbo just frickin kicked in and he was ahead of us by about a little less than a car length. I was VERY surprised and impressed. we lost...
Then later this nite we pulled up to ANOTHER Eagle Talon, 1990.. i do believe..Anyways, he had lots done to it as well. Like huge spoiler, rims, tires, exhaust, headers, etc.) ANyways, he also had lots of power under his hood and he whooped us like the first one. It was only a short distance. Plus my friends Vette just got the new engine and it needs to get worked in. The headers were so WHITE tonite..god. Anyways, after driving we found some friends and pulled some good ol' donuts in the parking lot. My friend just lit it up..sweet nite. |
|
|
|
06-22-2002, 11:49 AM
|
#2 |
|
Posts: n/a
|
sounds like a fun nite!
 |
|
|
|
06-22-2002, 01:18 PM
|
#3 |
|
Registered User
Join Date: Apr 2002
Location: Calgary, AB Canada
Age: 40
Posts: 2,962
|
It was pretty sweet.
|
|
|
|
|
06-23-2002, 02:54 AM
|
#4 |
|
Repost Wagon
Join Date: Dec 2001
Location: over here
Age: 44
Posts: 17,266
|
dang. i want a turbo
__________________
 
|
|
|
|
|
06-24-2002, 12:55 PM
|
#5 | |
|
Zoom-Zoom
Join Date: Sep 2001
Location: Ohio
Posts: 3,924
|
You can't count those older talons out. There was one at Racewars that beat a C5 vette. The vette had nitrous and huge list of other things. Know that he didn't have? Turbo......
__________________
Quote:
|
|
|
|
|
|
07-22-2002, 08:58 PM
|
#6 | |
|
Posts: n/a
|
Quote:
Yep, my old 92' Eagle Talon AWD TSI Turbo ran consistent 12.7's@107 .. very stealthy car indeed and I miss it. |
|
|
|
|
07-22-2002, 10:16 PM
|
#7 |
|
Posts: n/a
|
i think your friend needs to break in his engine in before does anymore racing
|
|
|
|
07-22-2002, 10:40 PM
|
#8 | |
|
Zoom-Zoom
Join Date: Sep 2001
Location: Ohio
Posts: 3,924
|
OT
Nice setup there 1BadAzzGT. Any pics? 
__________________
Quote:
|
|
|
|
|
|
07-23-2002, 12:09 AM
|
#9 | |
|
Thought Police
Join Date: Aug 2001
Location: orlando florida
Age: 41
Posts: 9,662
|
Quote:
__________________
Black Vtec Prelude-h22a power'd  Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold. |
|
|
|
|
|
07-23-2002, 05:34 PM
|
#10 | |
|
Posts: n/a
|
Quote:
Thank you very much, I have tons of blood sweat and tears in this car for sure. Yes I have tons of pics Here is a picture of the new setup:  Another pic of the old setup:  Here is a picture of the car (old setup):  Sorry pics are so big. BTW, I like what you've done to your engine comparment... looks very clean and neat not to mention down right nasty |
|
|
|
|
07-23-2002, 08:51 PM
|
#11 | |
|
Zoom-Zoom
Join Date: Sep 2001
Location: Ohio
Posts: 3,924
|
Thanks...
That Vortech is beautiful sight.... 
__________________
Quote:
|
|
|
|
|
|
07-23-2002, 08:54 PM
|
#12 | |
|
Posts: n/a
|
Quote:
Thanks, it's been quite a learning experience for me. I have one block to show for most of my "learning" with a huge hole in it. |
|
|
|
|
07-24-2002, 07:17 AM
|
#13 | ||
|
Zoom-Zoom
Join Date: Sep 2001
Location: Ohio
Posts: 3,924
|
Quote:
__________________
Quote:
|
||
|
|
|
|
07-24-2002, 03:35 PM
|
#14 | |
|
Posts: n/a
|
Quote:
This is a picture of the carnage from last block. The picture does it no justice... about 99% of the cylinder was gone and all of the piston was just about gone as well... no sign of rod or wrist pin See anything missing?  Little closer look:    |
|
|
|
|
07-24-2002, 03:46 PM
|
#15 | |
|
Zoom-Zoom
Join Date: Sep 2001
Location: Ohio
Posts: 3,924
|
I think I'm about to cry.....
That's horrible man. Hopefully you got things tuned this time around. Hate to see that happen again....
__________________
Quote:
|
|
|
|
|
|
07-24-2002, 09:06 PM
|
#16 |
|
Thought Police
Join Date: Aug 2001
Location: orlando florida
Age: 41
Posts: 9,662
|
wow.... im speachless
__________________
Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold. |
|
|
|
|
07-25-2002, 07:01 PM
|
#17 | |
|
Posts: n/a
|
Quote:
Thanks. Actually the car has been down since January (1st run of the new season... way to start it, huh?) Anyway, I ended up purchasing a 2000 GT engine (much stronger then previous and had a few internal things taken care of.... won't go into too much detail). But while the car was down, I took the opportunity to change quite a few things. It all started with.... well since it has no engine in it right now, let's convert it from 5 speed to built up automatic with nice stall converter, why not do a tubular k member.. hehe. Then tubular a arms, then the new shocks/struts, new rims/tires... it's like being a crack addict although I'm starting to believe this is much worse. LOL. Oh well good news is...... I finally got the car started today! Kinda felt like my birthday in a sense cause I had been tracking down a stupid electrical issue that turned out to be the MSD digital ignition wiring. I suspect somewhere in the circuit it got pinched and caused a "no spark" condition. Oh well, it started today and will be on the road to recovery real soon. I can't wait to run a few of my LS1 friends now  My previous trap speeds were poor with only around 111/112. I'm hoping for much more with the weight savings and engine that's currently in her < fingers crossed>.Sorry for so long... I'm just very excited to hear the thing run. Cheers. P.S. If you thought that one picture would make you cry, try looking at this for a while:  Here's a picture of the old K member (around 58 lbs):  Here a picture of the new tubular k member:  And finally, a picture of the new tubular A arms and coilovers on the car now:  |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
