.:HSTuners::::Hondas Wanted:: |
06-19-2002, 02:06 AM
|
#1 |
|
Posts: n/a
|
17" or 18"
anyone who lives in jersey answer me this: is it worth getting 18" rims? i want the RH evolution s7's 18" for my accord coupe v6... but there are a fair share of pot holes out there. and i dunno much about how well rims hold up or how long they last, but i wanan make these last. would it be better to just get 17ers? please i need any information you can give me about rims and stuff. an FAQ would be helpful. thnx
|
|
|
06-19-2002, 07:31 AM
|
#2 |
|
Posts: n/a
|
i have the same car..exccept 4 cy.. but i have 18" (enkei rs5) on it and i live in orange county Ny (the sticks almost) but i have a fair share of potholes and they have been holding up fine.. of course i know the roads and if u know where the biggest holes r def SLOW down. but other than that u should be fine.. plus 18" look soo much nicer the fit the entire wheelwell ...personally i think 17" look soo small on our car...
 cccan u see what i mean.... |
|
|
|
06-19-2002, 01:46 PM
|
#3 |
|
Posts: n/a
|
Girl:
What are you running on there? 225/40/18? And what offest, 42mm? Guy: One of the things that will help a lot if you live near potholes is having the correct rebound settings on your shocks. If you plan on lowering and getting shocks, get some with adjustable compression/rebound settings so you can protect your wheels. I haven't personally known anybody to dent a rim yet with 18" on Accords, and that's in ATL where there's plenty of potholes....but your mileage may vary. b |
|
|
|
06-19-2002, 10:18 PM
|
#4 |
|
Posts: n/a
|
Hondagirl...car looks sweet. Very clean...like it a lot.
 GuyX: U can't compare with the impact that 18's give you. Nowadays ur starting to see some cars come with 17's...18's still give u that aftermarket look. I was thinkin 17 or 18 too...but my concern was ride harshness more than denting a rim. U should also keep the type of rim u buy in mind. If you buy light rims, they're great to race, but dent easier. (I dunno why you'd be buying 18's if you race...uhhh...whatever...) Btw, I'll guess 215/40/18...am i rite? |
|
|
|
06-19-2002, 11:33 PM
|
#5 |
|
Repost Wagon
Join Date: Dec 2001
Location: over here
Age: 44
Posts: 17,266
|
i think 17 will look great. can't say anything about the size because i don't know anything about the stock size on the 6th geezer
__________________
 
|
|
|
|
06-20-2002, 01:34 AM
|
#6 |
|
Insomniac Moderator
Join Date: Aug 2001
Location: OR
Age: 44
Posts: 11,142
|
On a 6th gen, 18" is a much for looks. 17 just doesn't look big enough IMHO.
__________________
1994 Accord EX coupe --Need hosting for your pics on HST? PM me...-- |
|
|
|
|
06-21-2002, 08:44 AM
|
#7 |
|
Posts: n/a
|
go with 18's , you wont regret it - JUST BE CAREFULL. I have 18" Volks (forged Aluminum) very strong and I have hit my fi=air share of potholes and not a scratch. I guess what I'm saying is speeeeend the extra $ for good rims and you cant go wrong, take the cheap route and suffer the consequences.
|
|
|
|
06-21-2002, 12:22 PM
|
#8 | |
|
Posts: n/a
|
Re: 17" or 18"
Quote:
Okay! I guess I am the only one from New Jersey who can answer this.  It depends where in Jersey you are at. Are you close to NYC or to Philly? I am close to NYC and I drive my car to Manhattan often thats why I picked 17s. 18 looks great but 17s are more practical and more performance oriented for your car especially here in the Tri-state area. You should also get good suspension parts for your wheels. Good Luck! |
|
|
|
|
06-22-2002, 10:46 PM
|
#9 | |
|
Posts: n/a
|
Quote:
yes..not sure on the offset though.l.ill get back to u |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
