.:HSTuners::

thermal · 06-01-2002, 11:48 PM

this is what i recommend to reset the ECU.
1) start the car without pressing the gas and run for 5 minutes or until it idles.
2) turn off the car
3) disconnect the negative terminal of the battery
4) wait about 5-10 minutes
5) reconnect the negative side of the battery
6) restart the car without pressing the gas and let it idle.

i recommend that you reset your ECU each time you get a performance mod, especially if it regards to Air, Fuel, and spark. resetting the ECU will allow for compensation with the upgrade. it is NOT NECESSARY, but i do recommend.

06-01-2002, 11:48 PM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	this is what i recommend to reset the ECU. 1) start the car without pressing the gas and run for 5 minutes or until it idles. 2) turn off the car 3) disconnect the negative terminal of the battery 4) wait about 5-10 minutes 5) reconnect the negative side of the battery 6) restart the car without pressing the gas and let it idle. i recommend that you reset your ECU each time you get a performance mod, especially if it regards to Air, Fuel, and spark. resetting the ECU will allow for compensation with the upgrade. it is NOT NECESSARY, but i do recommend. __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode