.:HSTuners::

05-30-2002, 10:11 PM

hi, i just got these installed but...my brake lights dont work... here is a picture of the altezzas

http://www.eautoworks.com/html/ORD-A...-4652-none.cfm

umm....the left big one is the signal and blinks, and always on when not blinking...

the middle one with the white....the white is the backing light...the other half stays on the whole time...

but..the right one....smallest one...doesnt even light up at all no matter what..

is it supposed to be the signal or brake light? or what? how do i fix this? anyone know what all the lights are supposed to be?

94_AcCoRd_EX · 05-30-2002, 10:47 PM

Is it just a reflector? I'm not sure what you're saying... do you have a bulb in it right now?

05-30-2002, 11:30 PM

everything should be a okay if they were installed correctly. Did you do the installing, or did you pay some guy to do it?
When I installed my tails the only problem I had is that a brake light burnt out. I just went down to pepboys and two bucks later the problem was fixed.

05-31-2002, 12:09 PM

sometime when u mess w/ it the bulb goes out...just buy a new bulb n you should be fine..

altezza

05-31-2002, 02:13 PM

hmm...if the bulb DID go out...why would both go out? and...not any others? maybe it was installed wrong... my brother's friends did it so i dunno what they did... ill go ask some shop today...

05-31-2002, 10:10 PM

got the altezzas checked out...the smallest circles...they have no bulb slots? wtf.... hmm...then the biggest circle on the outside are supposed to be break lights...but...they dont turn brighter....hmm.... when i signal..then it turns brighter...i think when i break...it supposed to be bright as the signal....

06-01-2002, 12:22 AM

i finally figured it out....i decided to do it myself.... heres the thing...that third light...smallest one...not even a light....its just decoration i guess.....

but....when you look at the back lights..there are three wire thingys that connect to the altezzas.... the altezzas only provide you with 2 slots....when theres three wires...the two wires go to the bulbs but the third one...if you looked on the stock lights....theres a chip to it....i removed that chip....and....inserted it into the third wire.....and.....everything works now!

05-30-2002, 10:11 PM	#1
dc1234 Posts: n/a	accord 00 4dr euro altezza gen 2 help! hi, i just got these installed but...my brake lights dont work... here is a picture of the altezzas http://www.eautoworks.com/html/ORD-A...-4652-none.cfm umm....the left big one is the signal and blinks, and always on when not blinking... the middle one with the white....the white is the backing light...the other half stays on the whole time... but..the right one....smallest one...doesnt even light up at all no matter what.. is it supposed to be the signal or brake light? or what? how do i fix this? anyone know what all the lights are supposed to be?

05-30-2002, 10:47 PM	#2
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	Is it just a reflector? I'm not sure what you're saying... do you have a bulb in it right now? __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-30-2002, 11:30 PM	#3
accordboy00 Posts: n/a	everything should be a okay if they were installed correctly. Did you do the installing, or did you pay some guy to do it? When I installed my tails the only problem I had is that a brake light burnt out. I just went down to pepboys and two bucks later the problem was fixed.

05-31-2002, 12:09 PM	#4
AcCoRd97Lx Posts: n/a	sometime when u mess w/ it the bulb goes out...just buy a new bulb n you should be fine.. altezza

05-31-2002, 02:13 PM	#5
dc1234 Posts: n/a	hmm...if the bulb DID go out...why would both go out? and...not any others? maybe it was installed wrong... my brother's friends did it so i dunno what they did... ill go ask some shop today...

05-31-2002, 10:10 PM	#6
dc1234 Posts: n/a	got the altezzas checked out...the smallest circles...they have no bulb slots? wtf.... hmm...then the biggest circle on the outside are supposed to be break lights...but...they dont turn brighter....hmm.... when i signal..then it turns brighter...i think when i break...it supposed to be bright as the signal....

06-01-2002, 12:22 AM	#7
dc1234 Posts: n/a	i finally figured it out....i decided to do it myself.... heres the thing...that third light...smallest one...not even a light....its just decoration i guess..... but....when you look at the back lights..there are three wire thingys that connect to the altezzas.... the altezzas only provide you with 2 slots....when theres three wires...the two wires go to the bulbs but the third one...if you looked on the stock lights....theres a chip to it....i removed that chip....and....inserted it into the third wire.....and.....everything works now!