.:HSTuners::

2ndGenTeg · 04-25-2002, 07:23 PM

With the harness not connected to the deck, you're probably gonna have to re-install it briefly. If you can easily get ahold of a harness, just hook up the remote, constant and ground to any 12V power source, and that would do the trick.

If you want to use the harness in the vehicle- Instead, just use the keys that came with the new deck to remove it, and connected to the harness adapter will be the stock harness. It's a lot easier than removing the trim piece.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-25-2002, 07:23 PM	#1
2ndGenTeg 4th Gear Join Date: Aug 2001 Location: Boulder, CO Age: 45 Posts: 830	With the harness not connected to the deck, you're probably gonna have to re-install it briefly. If you can easily get ahold of a harness, just hook up the remote, constant and ground to any 12V power source, and that would do the trick. If you want to use the harness in the vehicle- Instead, just use the keys that came with the new deck to remove it, and connected to the harness adapter will be the stock harness. It's a lot easier than removing the trim piece.