.:HSTuners::

04-11-2002, 02:51 PM

This technique is called torque-braking. By bringing the torque converter up to its stall-speed, then releasing the brake, you launch directly into the sweet spot of the powerband. If you want a quicker launch, try holding it at a slightly lower rpm. Also try lowering your front tire pressures (but only for a short period of time!).

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-11-2002, 02:51 PM	#2
Smitty90acc Posts: n/a	This technique is called torque-braking. By bringing the torque converter up to its stall-speed, then releasing the brake, you launch directly into the sweet spot of the powerband. If you want a quicker launch, try holding it at a slightly lower rpm. Also try lowering your front tire pressures (but only for a short period of time!).