.:HSTuners::::Hondas Wanted:: |
09-19-2001, 02:23 AM
|
#1 |
|
Posts: n/a
|
Msd Ignition 6a
I have recently Aquired an MSD Ignition (6A)
 . I just want to know what kind of spark plug wires do you guys who have the MSD use and also the spark plugs. I cant wait to put that puppy in!  |
|
|
09-19-2001, 04:21 AM
|
#2 |
|
Posts: n/a
|
I use both NGK plugs and wires. I used to have Denso Iridium plugs and ViTek wires, but I ended up destroying the electrodes on the plugs, and burned through the wires. About $150 worth of useless shit in my opinion. Hey, if NGK is good enough to hold up to the beating that Steph Papadakis puts on them, I am sure my car ain't nothing compared to them.
I willsay this though, MSD wires are nice. Also, the new Crane Cams 10mm might be worth looking into. |
|
|
|
09-19-2001, 11:19 AM
|
#3 |
|
Posts: n/a
|
I also burned up a set of Iridiums. Lately I have been running on Autolite 3924's gapped at .32 and they take plenty of boost with no problems. I originally wanted NGKs but no place had the ones I needed.
|
|
|
|
09-19-2001, 06:16 PM
|
#4 |
|
Posts: n/a
|
Can you specify which wires and spark plugs on the NGK. Thanks!
|
|
|
|
09-19-2001, 09:50 PM
|
#5 | |
|
Zoom-Zoom
Join Date: Sep 2001
Location: Ohio
Posts: 3,924
|
I think they were referring to these:
NGK V-Power Spark Plugs and NGK Wires There's really only one type of NGK Wires. And you'll want the V-Power plugs.
__________________
Quote:
|
|
|
|
|
09-20-2001, 12:48 PM
|
#6 |
|
Posts: n/a
|
Do you know how to wire an MSD 6A Into a 2000 Si????? Anyone?
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
