.:HSTuners::

thermal · 08-02-2006, 05:47 AM

If your VSS is bad, you will get a CEL. It looks like the signal is just either interrupted or shorted. I had the same problem. I ran a separate wire straight to where the signal is coming from the ECU, then to the gauge.

JDMFantasy2k · 08-02-2006, 08:38 AM

chances are that it's a wire comming out of your ecu and going to the gauge cluste because like arnel said if it's actually a vss wire it'd throw a CEL. So i'd be looking between gauge cluster and ecu.

08-02-2006, 05:47 AM	#1
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	If your VSS is bad, you will get a CEL. It looks like the signal is just either interrupted or shorted. I had the same problem. I ran a separate wire straight to where the signal is coming from the ECU, then to the gauge. __________________ Project Teg Visit the Turbo Forum

08-02-2006, 08:38 AM	#2
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	chances are that it's a wire comming out of your ecu and going to the gauge cluste because like arnel said if it's actually a vss wire it'd throw a CEL. So i'd be looking between gauge cluster and ecu. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode