.:HSTuners::::Hondas Wanted:: |
|
|
04-14-2006, 12:55 PM
|
#1 |
|
Banning Machine
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
|
All you need is 14mm washers fir the rear. Use 2 for each bolt. I actually replaced the bolts for longer ones.
Be very careful with the rear. The 14mm bolts on the LCA are notorious for snapping. The head more specifically. Have fun |
|
|
|
04-14-2006, 06:43 PM
|
#2 |
|
Registered User
Join Date: Mar 2004
Location: northeastern connecticut
Age: 38
Posts: 1,765
|
yeah i snapped one. Had a 3 foot breaker bar on it and slowly pushing and CLICK.
but it didn't matter cause i was in school, and we took an air chisel to the welded stud on the other side, busted it off, welded a washer in it's place, and replaced it with a nut and bolt  otherwise the rears went very smoothly, and i had them done in a little over 2 hours.
__________________
|
|
|
|
|
04-14-2006, 08:25 PM
|
#3 |
|
Registered User
Join Date: Mar 2004
Location: northeastern connecticut
Age: 38
Posts: 1,765
|
here's the pics, they look like shit cause the car was dirty and the lighting sucked. Plus i'm on snow tires. I expect the front to settle a little, plus i had just had it up on jacks so it looks a little high in the front, but it's pretty low overall.
__________________
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
