.:HSTuners::

thermal · 02-24-2006, 04:41 PM

Yep. That truck is a POS but I'm still thankful for it cuz it got me to places I needed to go. I spent about $1200 two days ago trying to pass an inspection.

Mischief · 02-24-2006, 04:52 PM

ha damn.. I might be start doing a sidejob making some decent money on the weekends, and I want to do a junkyard turbo set up on my 'teg.. we'll have to hook up so I can get some advice from you..

thermal · 02-24-2006, 05:15 PM

I'm always here mang

dabouncerx24 · 02-24-2006, 10:25 PM

Wow Arnel! You first started (or officially informed us about) the project around a year and a half ago man! From then until now I think everyone's been in love with your car and are extremely anxious to see what type of numbers it posts up. So glad to see the project is almost finished man, keep us informed.

thermal · 02-24-2006, 11:08 PM

thanks bro!

*KwikR6* · 02-24-2006, 11:17 PM

Quote:

Originally Posted by thermal

????... you still need plugs. It will be motorcycle plugs which is like $3.50 each.

Can't go wrong with anything motorcycle

Much

to the effort that you put in to your car man!

GT40FIED · 02-25-2006, 03:27 AM

I had a friend that converted an old school OHV motor to a c.o.p setup. He spent hundreds of bucks and weeks upon weeks trying to get it to work (which is finally did). He did it just to clean up the engine bay. Count me out of that one.

thermal · 02-25-2006, 09:22 AM

Yeah, with us Honda guys it's not really as bad as long as we use a stand alone.....

thermal · 02-25-2006, 10:24 PM

I'm still puzzled with the oil leak problem. After driving it more, it doesnt seem like my motor oil is going down. Further troubleshooting led me to think that maybe the tranny is leaking from the midshaft (half shaft) seal. If this is true, it will explain why I have oil all over the place. As the midshaft rotates, it slings oil all over the back side of the motor. I cant check the oil level on the tranny unless I drain it. But what I will do is use GM syncromesh this time since it has a distinguishing smell and color to it, unlike Honda MTF which is almost the same as a motor oil.....

thermal · 02-27-2006, 06:47 PM

FINALLY! I found the cause of the oil leak!!!!!! It was a pinched/cut o-ring on the PCV box.

Pics below includes the Tial 44mm WG, and the Honda motorcycle C.O.P conversion that I'm about to do. I also just received a phone call that the WG adapter came in. I will go ahead redo my WG set-up this week.

thermal · 02-27-2006, 07:00 PM

Some pics taken a couple of days ago.

BlackEJ · 03-01-2006, 08:45 PM

^^^^^^ Nice pics buddy!!!!!!!

thermal · 03-01-2006, 09:29 PM

Thanks for taking them pics bud.... We need to take more this weekend. The Teg is running again

JDMFantasy2k · 03-01-2006, 11:00 PM

I <3 V-Band wastegates

thermal · 03-01-2006, 11:10 PM

Yeah, I was almost done welding the DT when I blew the fuse in the garage...lol.

BlackEJ · 03-02-2006, 07:09 AM

Quote:

Originally Posted by thermal

Thanks for taking them pics bud.... We need to take more this weekend. The Teg is running again

Werd!!!!
I'll hit you up.

thermal · 03-02-2006, 09:52 PM

Update:

-Dump tube fabricated/installed/wrapped
-ATP Turbo Tial 38mm-44mm adapter flange installed

Igntion issues tho. I havent mess with the C.O.P yet, but my stock distributor went bad. We opened up the cap and discovered that the rotor screw came of and basically destroyed the cap internally. I'm borrowing another one from my tuner. We'll see what happens. Ordered a few more items. I will reveal later........

JDMFantasy2k · 03-03-2006, 10:12 AM

where did you find that wastegate adaptor? that's nasty

*pdiggitydogg* · 03-03-2006, 12:45 PM

gah
im just envious and wish mine would get moving faster!

thermal · 03-03-2006, 03:58 PM

Purchased the 38mm to 44mm adapter via my buddy BoostFed. He has an account at ATP Turbo.

Pat, if you only live close by, I'd be all over you trying get your shit expedited. I'm contagious man.... ha ha..... plus...

I finished the C.O.P harness. It actually looks better in "real life". I would've been running running this set-up already but the coils I bought were for a DSM motor instead... it is a little too short to reach the spark plug. It's okay tho, I'll just give it to my tuner since he tunes DSM's as well. I have another set coming.... the right ones this time

*KwikR6* · 03-03-2006, 06:53 PM

Fuck dude...that is sooo amazing.

thermal · 03-03-2006, 07:20 PM

Thanks bud

2000Pimpinex · 03-04-2006, 08:20 AM

WOW, car looks great. Awesome job on the rebuild.

thermal · 03-09-2006, 07:43 PM

thanks man.

I haven been super busy this week working on other people's car. I just got done rewiring an EK for a B18C1 service. I have more parts coming in. I wont say what it is right now. I'll just post pics once I get it done. I went back on the drawing board a few days ago. I'm making more changes before I dyno.

thermal · 03-13-2006, 05:41 PM

It has been very slow on my end. We installed a supposedly turbo "kit" on a 2001 Integra GSR 2 days ago. We also did some dyno tuning on a few friends. It has been nothing but running around all week. I'm exhausted. I have most of the parts for a newly improved set-up. Here is a pic of what I did today. I'll post the rest of the pics tomorrow. Below is the 86-93 Mustang throttle body. 75mm in size. Next to it is the 70mm RPM Services throttle body.

thermal · 03-16-2006, 11:07 PM

I've received these in the past few days. Fun begins tomorrow.....

*86-93 Mustang 75mm Thottle Body
*Edelbrock adapter plate
*Quaife Torque Biasing Differential (LSD)
*Precision 750hp intercooler

First pic is the comparison of the a 70mm RPM Services TB and the 75mm Mustang TB.

dabouncerx24 · 03-17-2006, 12:16 AM

dude i was just curious..what kinda security device are you gonna put in it

Mischief · 03-17-2006, 01:28 AM

he doesn't need one.. if it gets stolen he'll have a destroyer up someone's ass.. thermal's got connections

thermal · 03-17-2006, 05:34 AM

ha ha ha ha..... I rarely drive my car anywhere bro. It is babied in a garage. I dont go clubbing/barhopping, so really, by sunset, my car is locked down in my garage already......

BlackEJ · 03-21-2006, 02:09 PM

Quote:

Originally Posted by thermal

ha ha ha ha..... I rarely drive my car anywhere bro. It is babied in a garage. I dont go clubbing/barhopping, so really, by sunset, my car is locked down in my garage already......

that's how he use to roll, back in the day!!!

thermal · 03-22-2006, 09:27 PM

Quote:

Originally Posted by BlackEJ

that's how he use to roll, back in the day!!!

wooot... Ricer Alert!!! Dont be posting your boyfriend's car on here.... fagboy

BlackEJ · 03-23-2006, 07:26 AM

Damn man I thought it was you!!!!!
My bad.......

thermal · 03-23-2006, 08:13 PM

Quote:

Originally Posted by BlackEJ

Damn man I thought it was you!!!!!
My bad.......

fuk u biatch. Let me wire the sidemarker this weekend.....

BlackEJ · 03-23-2006, 08:21 PM

Quote:

Originally Posted by thermal

Let me wire the sidemarker this weekend.....

How are we gonna do that? I work this weekend, but I dunno I'll hit you up this sometime.
Thanks

-boy.

Gone · 03-23-2006, 10:48 PM

Would you guys recommend a Fluidyne radiator full size or half size (havn't found one) for daily use? And for track use a half size? dual core?

thermal · 03-24-2006, 06:05 PM

For all motor application, full size. For Turbo set-up, half size dual core since space will be limited.

thermal · 03-26-2006, 07:41 PM

I really havent done much lately. Too busy helping friends get their car up. I did a few small stuff. Pic 1 is a fabrication I did to delete the stock IACV and I added another vacuum source which be used for the 3 Bar map sensor. Pic 2 is the mouted position of the Precision 750hp IC. Pic 3 is the comparison in thickness of my previous Spearco IC. Pic 4 is the Exedy Twin disc awaiting for duty once I the tranny comes back from the Quaife LSD install.

The intercooler size forced me to yet again refab another piping on the driver side. I'll post pics later. I just need to paint and wrap it. THe fab kicked my ass.....

JDMFantasy2k · 03-26-2006, 09:35 PM

that intercooler looks like its made for a mack truck....

how are you going to run it without an iavc?

GT40FIED · 03-26-2006, 09:52 PM

Damn Arnel...that might just be bigger than my IC, and that's saying a lot.

So is the plan to just make the IC the new front end of the car?

thermal · 03-27-2006, 10:22 AM

Quote:

Originally Posted by JDMFantasy2k

that intercooler looks like its made for a mack truck....

how are you going to run it without an iavc?

I have an IACV bro.... it's just that it wont be a Honda IACV. I'll be using a Ford IACV. Freebie from the Junkyard. I'll be able to run any of the Ford IACV with the same flange pattern like the ones below. It will be recalibrated via EMS.

Steve, I know what you mean. I never had a bumper support to begin with actually. That IC is thick as well which will require me to cut some areas on my bumper again....

02-24-2006, 04:41 PM	#321
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Yep. That truck is a POS but I'm still thankful for it cuz it got me to places I needed to go. I spent about $1200 two days ago trying to pass an inspection. __________________ Project Teg Visit the Turbo Forum

02-24-2006, 05:15 PM	#323
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I'm always here mang __________________ Project Teg Visit the Turbo Forum

02-24-2006, 11:08 PM	#325
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	thanks bro! __________________ Project Teg Visit the Turbo Forum

02-25-2006, 03:27 AM	#327
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	I had a friend that converted an old school OHV motor to a c.o.p setup. He spent hundreds of bucks and weeks upon weeks trying to get it to work (which is finally did). He did it just to clean up the engine bay. Count me out of that one. __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

02-25-2006, 09:22 AM	#328
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Yeah, with us Honda guys it's not really as bad as long as we use a stand alone..... __________________ Project Teg Visit the Turbo Forum

02-24-2006, 10:25 PM	#324
dabouncerx24 Registered User Join Date: Jul 2004 Posts: 548	Wow Arnel! You first started (or officially informed us about) the project around a year and a half ago man! From then until now I think everyone's been in love with your car and are extremely anxious to see what type of numbers it posts up. So glad to see the project is almost finished man, keep us informed.

02-25-2006, 10:24 PM	#329
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I'm still puzzled with the oil leak problem. After driving it more, it doesnt seem like my motor oil is going down. Further troubleshooting led me to think that maybe the tranny is leaking from the midshaft (half shaft) seal. If this is true, it will explain why I have oil all over the place. As the midshaft rotates, it slings oil all over the back side of the motor. I cant check the oil level on the tranny unless I drain it. But what I will do is use GM syncromesh this time since it has a distinguishing smell and color to it, unlike Honda MTF which is almost the same as a motor oil..... __________________ Project Teg Visit the Turbo Forum

03-01-2006, 08:45 PM	#332
BlackEJ Registered User Join Date: Feb 2004 Location: VA Bitches!!!! Posts: 39	^^^^^^ Nice pics buddy!!!!!!! __________________ Joo will bow down to Teh mastah

03-01-2006, 09:29 PM	#333
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Thanks for taking them pics bud.... We need to take more this weekend. The Teg is running again __________________ Project Teg Visit the Turbo Forum

03-01-2006, 11:00 PM	#334
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	I <3 V-Band wastegates __________________

03-01-2006, 11:10 PM	#335
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Yeah, I was almost done welding the DT when I blew the fuse in the garage...lol. __________________ Project Teg Visit the Turbo Forum

03-03-2006, 10:12 AM	#338
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	where did you find that wastegate adaptor? that's nasty __________________

03-03-2006, 12:45 PM	#339
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	gah im just envious and wish mine would get moving faster!

03-03-2006, 06:53 PM	#341
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 45 Posts: 8,871	Fuck dude...that is sooo amazing. __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

03-03-2006, 07:20 PM	#342
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Thanks bud __________________ Project Teg Visit the Turbo Forum

03-04-2006, 08:20 AM	#343
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 44 Posts: 1,427	WOW, car looks great. Awesome job on the rebuild. __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

03-09-2006, 07:43 PM	#344
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	thanks man. I haven been super busy this week working on other people's car. I just got done rewiring an EK for a B18C1 service. I have more parts coming in. I wont say what it is right now. I'll just post pics once I get it done. I went back on the drawing board a few days ago. I'm making more changes before I dyno. __________________ Project Teg Visit the Turbo Forum

03-17-2006, 12:16 AM	#347
dabouncerx24 Registered User Join Date: Jul 2004 Posts: 548	dude i was just curious..what kinda security device are you gonna put in it

03-17-2006, 05:34 AM	#349
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	ha ha ha ha..... I rarely drive my car anywhere bro. It is babied in a garage. I dont go clubbing/barhopping, so really, by sunset, my car is locked down in my garage already...... __________________ Project Teg Visit the Turbo Forum

03-23-2006, 07:26 AM	#352
BlackEJ Registered User Join Date: Feb 2004 Location: VA Bitches!!!! Posts: 39	Damn man I thought it was you!!!!! My bad....... __________________ Joo will bow down to Teh mastah

03-23-2006, 10:48 PM	#355
Gone Registered User Join Date: Feb 2006 Location: St. Petersburg, Florida Age: 36 Posts: 143	Would you guys recommend a Fluidyne radiator full size or half size (havn't found one) for daily use? And for track use a half size? dual core? __________________

03-24-2006, 06:05 PM	#356
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	For all motor application, full size. For Turbo set-up, half size dual core since space will be limited. __________________ Project Teg Visit the Turbo Forum

03-26-2006, 09:35 PM	#358
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	that intercooler looks like its made for a mack truck.... how are you going to run it without an iavc? __________________

03-26-2006, 09:52 PM	#359
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	Damn Arnel...that might just be bigger than my IC, and that's saying a lot. So is the plan to just make the IC the new front end of the car? __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode