.:HSTuners::

IALuder · 02-13-2006, 11:38 PM

http://www.ecimulti.org/albums/album..._001.sized.jpg

what yea think?

no thats not my lude either. its a h23turbo a friend of mine is parting out.

thermal · 02-14-2006, 08:28 AM

Is that a JRC FMIC? Too small man. Even my d-series FMIC at 10 psi wa bigger than that. It also looks like that it is a tube and fin design. With your built motor, why not go bigger and more efficient. Get a bar and plate design such as Precision or Spearco.

IALuder · 02-14-2006, 05:49 PM

well its a hundred bucks, i dont plan to boost much power at first and its my first build. i dont know what half the shit you said ment.

*AzCivic* · 02-14-2006, 05:53 PM

Quote:

Originally posted by IALuder
well its a hundred bucks, i dont plan to boost much power at first and its my first build. i dont know what half the shit you said ment.

this, among other posts you've made worry me a little.

IALuder · 02-14-2006, 05:56 PM

how? like im going to fuck up my build. that wont happen i got to good friends that know their shit.

*AzCivic* · 02-14-2006, 06:59 PM

oh ok cool. then hurry up already

IALuder · 02-14-2006, 08:07 PM

i know, i need start putting shit together and stop collecting everything.

thermal · 02-14-2006, 11:15 PM

Low boost is not the issue here man. It is "efficiency". Why spend so much money on your motor then use a cheap IC....

IALuder · 02-15-2006, 01:23 AM

so what do you recommend?

GT40FIED · 02-15-2006, 04:56 AM

I'm a big fan of Spearco myself. But then again, my IC was made for another application and it's HUGE. It's supposed to be a direct fit for Mustangs, but I had to do a little "massaging" to get it in there.

thermal · 02-15-2006, 10:00 AM

Spearco or Precision. Bar and Plate design.

IALuder · 02-15-2006, 02:51 PM

what is bar and plate design?

thermal · 02-15-2006, 03:25 PM

There are two major air-to-airintercooler design: "Bar and Plate" and "Tube and Fin". You can easily tell the difference by looking at the end tanks to view the design. You'll see that bar and plate also has fins inside tha bar in which charged air passes through, whereas tube and fin doesnt. Bar and plate has been proven to remove heat better due to its design. Remember the most of the cooling (heat transfer) occurs on the first 3-5 inches of the intercooler.

IALuder · 02-15-2006, 03:29 PM

oh i c. but whats size ic do you recommend. i mean fuck i dont got much room to work with.

JDMFantasy2k · 02-15-2006, 03:56 PM

i'm running a 6x3x30 johnnyracecar.com intercooler. Awesome quality and unbeatable price. Lot of people on HMT use them too. You can also get them at his Ebay auctions

IALuder · 02-15-2006, 04:16 PM

hmmm. i might look that up.

JDMFantasy2k · 02-15-2006, 06:42 PM

go to HMT.com cause if you click on the sponsors tab there's another company called CCA that does cheap intercoolers, and i think they're like my JRC

thermal · 02-15-2006, 07:36 PM

Both JRC and the lower CCA FMIC are tube and fin. Ha ha... my civic is even on CCA's site.

I dont know if you want to keep your bumper support. I took mine off to allow mounting for a decent size intercooler

IALuder · 02-15-2006, 08:09 PM

im not losing another lude becuase of that.

JDMFantasy2k · 02-15-2006, 09:32 PM

yeah i still have mine, tight fit, but it fits. I figure unless you're looking for more than 300 hp something like a 6x3x30 should suffice. Plus you could always modify the support a little if you had to.

02-13-2006, 11:38 PM	#1
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	my ic http://www.ecimulti.org/albums/album..._001.sized.jpg what yea think? no thats not my lude either. its a h23turbo a friend of mine is parting out. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-14-2006, 08:28 AM	#2
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Is that a JRC FMIC? Too small man. Even my d-series FMIC at 10 psi wa bigger than that. It also looks like that it is a tube and fin design. With your built motor, why not go bigger and more efficient. Get a bar and plate design such as Precision or Spearco. __________________ Project Teg Visit the Turbo Forum

02-14-2006, 05:49 PM	#3
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	well its a hundred bucks, i dont plan to boost much power at first and its my first build. i dont know what half the shit you said ment. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-14-2006, 05:56 PM	#5
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	how? like im going to fuck up my build. that wont happen i got to good friends that know their shit. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-14-2006, 08:07 PM	#7
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	i know, i need start putting shit together and stop collecting everything. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-14-2006, 06:59 PM	#6
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	oh ok cool. then hurry up already

02-14-2006, 11:15 PM	#8
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Low boost is not the issue here man. It is "efficiency". Why spend so much money on your motor then use a cheap IC.... __________________ Project Teg Visit the Turbo Forum

02-15-2006, 01:23 AM	#9
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	so what do you recommend? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-15-2006, 04:56 AM	#10
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	I'm a big fan of Spearco myself. But then again, my IC was made for another application and it's HUGE. It's supposed to be a direct fit for Mustangs, but I had to do a little "massaging" to get it in there. __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

02-15-2006, 10:00 AM	#11
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Spearco or Precision. Bar and Plate design. __________________ Project Teg Visit the Turbo Forum

02-15-2006, 02:51 PM	#12
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	what is bar and plate design? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-15-2006, 03:25 PM	#13
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	There are two major air-to-airintercooler design: "Bar and Plate" and "Tube and Fin". You can easily tell the difference by looking at the end tanks to view the design. You'll see that bar and plate also has fins inside tha bar in which charged air passes through, whereas tube and fin doesnt. Bar and plate has been proven to remove heat better due to its design. Remember the most of the cooling (heat transfer) occurs on the first 3-5 inches of the intercooler. __________________ Project Teg Visit the Turbo Forum

02-15-2006, 03:29 PM	#14
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	oh i c. but whats size ic do you recommend. i mean fuck i dont got much room to work with. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-15-2006, 03:56 PM	#15
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	i'm running a 6x3x30 johnnyracecar.com intercooler. Awesome quality and unbeatable price. Lot of people on HMT use them too. You can also get them at his Ebay auctions __________________

02-15-2006, 04:16 PM	#16
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	hmmm. i might look that up. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-15-2006, 06:42 PM	#17
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	go to HMT.com cause if you click on the sponsors tab there's another company called CCA that does cheap intercoolers, and i think they're like my JRC __________________

02-15-2006, 07:36 PM	#18
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Both JRC and the lower CCA FMIC are tube and fin. Ha ha... my civic is even on CCA's site. I dont know if you want to keep your bumper support. I took mine off to allow mounting for a decent size intercooler __________________ Project Teg Visit the Turbo Forum

02-15-2006, 08:09 PM	#19
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	im not losing another lude becuase of that. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-15-2006, 09:32 PM	#20
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	yeah i still have mine, tight fit, but it fits. I figure unless you're looking for more than 300 hp something like a 6x3x30 should suffice. Plus you could always modify the support a little if you had to. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode