.:HSTuners::

IALuder · 01-28-2006, 03:34 PM

http://www.hmotorsonline.com/shop/sc...age&item=20013

my friend wants to buy those. but how hard are they to install?

*pdiggitydogg* · 01-28-2006, 03:47 PM

nope, totally plug and play
he just has to learn to read km instead

Just remove 2 screws, pull the bezel, undo 4 bolts around the cluster, unplug 4 connectors. Replace cluster and reverse.

IALuder · 01-28-2006, 05:01 PM

sweet thanks.

any suggestions on the guages? like dislikes ect...

sicones · 01-28-2006, 05:16 PM

I'd like to get the 99-00 si guages, it will also get rid of the P,R,N,D lights from my automatic swap, plus they look better.

*pdiggitydogg* · 01-28-2006, 05:55 PM

I like the em1 gauges too, but i hate how it says SI on the fuel/temp section.
I found the part number to the canadian section, but it was $100...and I dont feel like spending more than 1/2 of what I paid for the entire unit, on one dinky piece.... Oh, the canadian SIR has that written on the speedo, leaving the fuel section blank.

IALuder · 01-28-2006, 06:32 PM

^pics?

*pdiggitydogg* · 01-29-2006, 01:21 PM

like this:

but without the SIR

sicones · 01-29-2006, 02:42 PM

^^^thats the canadian one then, right??? I like how it says Si by the temp and gas part, it looks sporty

JDMFantasy2k · 01-29-2006, 03:01 PM

i love the EM1 cluster. Plus i like the "Si" since i want to do an Si conversion someday

sicones · 01-29-2006, 03:58 PM

your turbo d is already better then an si, you just need rear disk brakes, which I'm planning on doing very soon.

*pdiggitydogg* · 01-29-2006, 04:24 PM

Yeah, but if it didnt have any markings, it would look so much cleaner
usdm majority, cdm fuel/temp section

JDMFantasy2k · 01-29-2006, 05:20 PM

Quote:

Originally posted by sicones
your turbo d is already better then an si, you just need rear disk brakes, which I'm planning on doing very soon.

thanks, but hopefully by summer or fall i'll have a turbo B

sicones · 01-29-2006, 06:21 PM

I thought you were gonna stick with the d series....

01-28-2006, 03:34 PM	#1
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	SiR gauges http://www.hmotorsonline.com/shop/sc...age&item=20013 my friend wants to buy those. but how hard are they to install? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

01-28-2006, 05:01 PM	#3
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	sweet thanks. any suggestions on the guages? like dislikes ect... __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

01-28-2006, 06:32 PM	#6
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	^pics? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

01-29-2006, 03:01 PM	#9
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	i love the EM1 cluster. Plus i like the "Si" since i want to do an Si conversion someday __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-28-2006, 03:47 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	nope, totally plug and play he just has to learn to read km instead Just remove 2 screws, pull the bezel, undo 4 bolts around the cluster, unplug 4 connectors. Replace cluster and reverse.

01-28-2006, 05:16 PM	#4
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	I'd like to get the 99-00 si guages, it will also get rid of the P,R,N,D lights from my automatic swap, plus they look better.

01-28-2006, 05:55 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	I like the em1 gauges too, but i hate how it says SI on the fuel/temp section. I found the part number to the canadian section, but it was $100...and I dont feel like spending more than 1/2 of what I paid for the entire unit, on one dinky piece.... Oh, the canadian SIR has that written on the speedo, leaving the fuel section blank.

01-29-2006, 01:21 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	like this: but without the SIR

01-29-2006, 02:42 PM	#8
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	^^^thats the canadian one then, right??? I like how it says Si by the temp and gas part, it looks sporty

01-29-2006, 03:58 PM	#10
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	your turbo d is already better then an si, you just need rear disk brakes, which I'm planning on doing very soon.

01-29-2006, 04:24 PM	#11
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Yeah, but if it didnt have any markings, it would look so much cleaner usdm majority, cdm fuel/temp section

01-29-2006, 06:21 PM	#13
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	I thought you were gonna stick with the d series....