.:HSTuners::

strikingaccord · 03-27-2005, 06:15 AM

You'll need custom mounts....check with Hasport. I know they have a kit for a KA20 (RSX) into a DC chassis integra (B18) You'll have to use the RSX axles, which gives you 3 options. 1) get custom axles made to fit your 4 lug hub. (driveshaftshop.com) 2) do a 5 lug conversion (use the v6 accord) in the rear to match the 5 lug you'll then have up front. 3) drive around with 5 lug up front and 4 in the back, meaning you'll have to buy new wheels. You still need to do your homework and take measurements and figure out where you can relocate things like power steering, brake booster, whatever. Good Luck.

03-27-2005, 06:15 AM	#5
strikingaccord 1st Gear Join Date: Mar 2005 Location: Philadelphia PA Age: 45 Posts: 40	You'll need custom mounts....check with Hasport. I know they have a kit for a KA20 (RSX) into a DC chassis integra (B18) You'll have to use the RSX axles, which gives you 3 options. 1) get custom axles made to fit your 4 lug hub. (driveshaftshop.com) 2) do a 5 lug conversion (use the v6 accord) in the rear to match the 5 lug you'll then have up front. 3) drive around with 5 lug up front and 4 in the back, meaning you'll have to buy new wheels. You still need to do your homework and take measurements and figure out where you can relocate things like power steering, brake booster, whatever. Good Luck. __________________ I must have done a really good job installing these parts. Look at all these bolts I have left over.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode