.:HSTuners::

*pdiggitydogg* · 12-14-2004, 09:12 PM

if you have abs, you have rear disc - so dont worry about the rears...stick with what you have there.

Again, the itr/nsx calipers bolt right onto the ex/si knuckle. You dont need that part either.

All you need are the front calipers and brakets

Legend=NSX as far as brakes go. Both are 2 piston calipers and are the absolute largest that you can get from oem honda.

No matter what size fronts you go with, I really really suggest going with a 1" master cylinder. If you dont, your pedal will just be limp as a wet noodle.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-14-2004, 09:12 PM	#19
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	if you have abs, you have rear disc - so dont worry about the rears...stick with what you have there. Again, the itr/nsx calipers bolt right onto the ex/si knuckle. You dont need that part either. All you need are the front calipers and brakets Legend=NSX as far as brakes go. Both are 2 piston calipers and are the absolute largest that you can get from oem honda. No matter what size fronts you go with, I really really suggest going with a 1" master cylinder. If you dont, your pedal will just be limp as a wet noodle.