.:HSTuners::

thermal · 12-02-2004, 10:22 PM

Craig at Tuner Toys is really one of the best people to deal with. I've talked to him a few times and is very helpful. The products he sells are all quality workmanship and material.

Your other option to eliminate 2 "tee" fittings is to get an oil filter sandwich with a minimum of 2 outlets. AIC and Summit sells it for about $50-60. GReddy makes their version with 3 outlets. That's what I have:
-Turbo oil feed
-Oil pressure gauge
-Oil temp gauge
Not a bad product at all. The only difference between the Tuner Toy version and the filter sandwich version is the obvious filtration. The filter sandwich is also easier to install.

Goodluck Pdiggs.

12-02-2004, 10:22 PM	#7
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Craig at Tuner Toys is really one of the best people to deal with. I've talked to him a few times and is very helpful. The products he sells are all quality workmanship and material. Your other option to eliminate 2 "tee" fittings is to get an oil filter sandwich with a minimum of 2 outlets. AIC and Summit sells it for about $50-60. GReddy makes their version with 3 outlets. That's what I have: -Turbo oil feed -Oil pressure gauge -Oil temp gauge Not a bad product at all. The only difference between the Tuner Toy version and the filter sandwich version is the obvious filtration. The filter sandwich is also easier to install. Goodluck Pdiggs. __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode