.:HSTuners::

01-13-2002, 11:59 AM

OK im here. This is the basics of my old motor.

1997 B18B with stock sleeves
-crower rods
-SRP 9.2:1 forged pistons
-Nuforms block guard
-JG Pro Series head
-Crower 403 cams, stock cam gears
-Crower dual valves springs
-Apexi Power FC
-DRAG Gen 3 turbo kit
-RC 550cc injectors
-Skunk 2 manifold
-STR fuel rail
-Holley FI 255lph fuel pump
-3" downpipe
-3" Thermal exhaust with no cat
-BBK 62mm throttlebody

Wtih jsut these mods i went 11.6 @ 123 on 3 cylinders though 3rd and 4th gears before the plug in cylinder 4 failed. This was done at 22 psi on 24.5 MT ET slicks. I honestly feel that car may have been capable of a low 11 or maybe a high 10 second run. I am sticking with the non vtec for next year also. No matter what anyone will tell you stick with the B18B and do some headwork.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-13-2002, 11:59 AM	#1
Boosted3g Posts: n/a	OK im here. This is the basics of my old motor. 1997 B18B with stock sleeves -crower rods -SRP 9.2:1 forged pistons -Nuforms block guard -JG Pro Series head -Crower 403 cams, stock cam gears -Crower dual valves springs -Apexi Power FC -DRAG Gen 3 turbo kit -RC 550cc injectors -Skunk 2 manifold -STR fuel rail -Holley FI 255lph fuel pump -3" downpipe -3" Thermal exhaust with no cat -BBK 62mm throttlebody Wtih jsut these mods i went 11.6 @ 123 on 3 cylinders though 3rd and 4th gears before the plug in cylinder 4 failed. This was done at 22 psi on 24.5 MT ET slicks. I honestly feel that car may have been capable of a low 11 or maybe a high 10 second run. I am sticking with the non vtec for next year also. No matter what anyone will tell you stick with the B18B and do some headwork.