.:HSTuners::

*pdiggitydogg* · 03-13-2004, 09:57 PM

kingmotorsports.com

when you order them they will be the part number for the crx(ef civic), thats fine. The arms are the same -> bushing holes are the same.
(52385-xe5-s0n0 is what you get even if you order #-xe9-#. #-xe9-# is discontinued but it doesnt matter because the circumference of all ef/eg/ek/dc are 10" whereas da integra's are 10.5".............trust me...)

Youre just better off buying a used set of arms from ebay or getting the full setup at a junk yard. If you get em from a yard you can pull the mc,bb,prop,cables,lines,arms,calipers yourself for probably less than everything purchased online. Just remember that changing the entire arm is a whole lot easier than changing hubs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-13-2004, 09:57 PM	#8
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	kingmotorsports.com when you order them they will be the part number for the crx(ef civic), thats fine. The arms are the same -> bushing holes are the same. (52385-xe5-s0n0 is what you get even if you order #-xe9-#. #-xe9-# is discontinued but it doesnt matter because the circumference of all ef/eg/ek/dc are 10" whereas da integra's are 10.5".............trust me...) Youre just better off buying a used set of arms from ebay or getting the full setup at a junk yard. If you get em from a yard you can pull the mc,bb,prop,cables,lines,arms,calipers yourself for probably less than everything purchased online. Just remember that changing the entire arm is a whole lot easier than changing hubs.