.:HSTuners::

*pdiggitydogg* · 03-10-2004, 09:30 PM

they are all the same arms (all eg/ek/dc)
you can just swap the hubs over but you need a special driver to insert onto the back of the hub and an impact to remove it.

Physically, and in terms of finding the parts it is a whole lot easier to just buy the arms that already have rear disc (either off a sedan ex, si, or 94+ integra) and swap them on.

There's also a how-to thread in the DIY area of hst that has this info and how to actually do it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-10-2004, 09:30 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	they are all the same arms (all eg/ek/dc) you can just swap the hubs over but you need a special driver to insert onto the back of the hub and an impact to remove it. Physically, and in terms of finding the parts it is a whole lot easier to just buy the arms that already have rear disc (either off a sedan ex, si, or 94+ integra) and swap them on. There's also a how-to thread in the DIY area of hst that has this info and how to actually do it.