.:HSTuners::

03-08-2004, 01:35 PM

The drivers side rear suspension is all jacked on this car. The part was cracked when the car slid into a curb. The pictures are shown below, the weld is cracked and the wheel is bent severely because of it.

I would like to know what the specific name is of the part, and if anyone knows where I would be able to get a replacement, and about how much would it cost.

We tried to bolt a brace to it but still no dice.

Any help would be great!

*pdiggitydogg* · 03-08-2004, 01:55 PM

thats the rear subframe
get it from honda directly or from a civic in a junk yard

IALuder · 03-08-2004, 03:26 PM

^ i would go to the dealer first. i wouldnt try getting a used one.

*pdiggitydogg* · 03-08-2004, 05:04 PM

Id go for the used
mostly, it doesnt see a TON of action other than the daily driver stuff...it'd probably be fine

03-08-2004, 08:11 PM

alright cool, does anyone know of a website i could go to? or maybe a phone number to call?

thanks for your help guys

Fatal070 · 03-08-2004, 08:16 PM

the best place to go for junkyard parts is this place

there yeah go

03-08-2004, 08:27 PM

ok... so the name of the part is a "rear subframe" ?

my options are :

rear suspension
rear trailing arm
rear locating arm

... < = noob

*pdiggitydogg* · 03-08-2004, 08:55 PM

yes, but it is also known as rear crossmember Dont use a site that forces you to use a prefabbed list...call a local place out of your phone book
(be sure to specify rear of the vehicle...MANY people get confused and think front end dealing w/ steering)

03-08-2004, 09:03 PM

alright thanks guys, now i know what it is i'm looking for, i'll call the local dealership to find out where / how much.

tc

ebpda9 · 03-08-2004, 10:23 PM

Quote:

Originally posted by DoctorK
ok... so the name of the part is a "rear subframe" ?

my options are :

rear suspension
rear trailing arm
rear locating arm

... < = noob

it's called a cross beam. you may wanna try the local junkyards, but from what i see it is welded on, not screwed on like the newere civics and accords

03-09-2004, 04:27 PM

well damn so i would probably have to buy a fairly large peice i take it...

would it be easier to grind off the old weld and re-weld it? what type of weldrod would i use on that stuff?

*pdiggitydogg* · 03-09-2004, 05:46 PM

no, you can just buy that piece
(people that run large diameter rear sway bars often break this part and have it replaced)

I really doubt just welding up the tear is going to really fix it, but it would certainly do for a tempory fix as long as you dont do some serious driving/turing.

ShagginJet · 03-09-2004, 06:26 PM

Isn't this the same piece i fuxed up on my car....?

R u serious that this isn't part of the car? I can just replace it... I thought this was part of the body and that I needed to have it welded back together...?

ebpda9 · 03-09-2004, 06:52 PM

on those it looks like it's part of the car. on newer ones they are held on to the car with 4 screws

*pdiggitydogg* · 03-09-2004, 06:54 PM

you can replace it, yes.
but it is easier to weld it back up as a temp fix so you can drive it to the jyard to get your new used subframe off another civic

ShagginJet · 03-09-2004, 06:55 PM

How weird... I'll have to check that out this weekend. If it can be done myself then f*ck taking it anywhere.

*pdiggitydogg* · 03-09-2004, 08:44 PM

if you can weld then you can easily do it w/ the part, a jack, a square or 2, and your welder.

Some say that its bolted, some say its welded...it varies per generation and I dont know enough to say for sure.

ebpda9 · 03-10-2004, 07:54 AM

on the pre-92's it's welded. 92 and up it's bolted.

ShagginJet · 03-10-2004, 06:56 PM

So if i get that welded back together is it going to be steady enough for day to day driving? Should i even bother?

*pdiggitydogg* · 03-10-2004, 07:26 PM

yeah it'd be fine. thats the whole point
its only welded around the edges anyways
but if youre still afraid just run so big bolts through the center

03-08-2004, 01:35 PM	#1
DoctorK Posts: n/a	90 DX question The drivers side rear suspension is all jacked on this car. The part was cracked when the car slid into a curb. The pictures are shown below, the weld is cracked and the wheel is bent severely because of it. I would like to know what the specific name is of the part, and if anyone knows where I would be able to get a replacement, and about how much would it cost. We tried to bolt a brace to it but still no dice. Any help would be great!

03-08-2004, 03:26 PM	#3
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	^ i would go to the dealer first. i wouldnt try getting a used one. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

03-08-2004, 08:16 PM	#6
Fatal070 Registered User Join Date: Apr 2002 Location: New Castle , Pa Age: 41 Posts: 1,299	the best place to go for junkyard parts is this place there yeah go __________________

03-09-2004, 06:26 PM	#13
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	Isn't this the same piece i fuxed up on my car....? R u serious that this isn't part of the car? I can just replace it... I thought this was part of the body and that I needed to have it welded back together...? __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

03-09-2004, 06:52 PM	#14
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	on those it looks like it's part of the car. on newer ones they are held on to the car with 4 screws __________________

03-08-2004, 01:55 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	thats the rear subframe get it from honda directly or from a civic in a junk yard

03-08-2004, 05:04 PM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Id go for the used mostly, it doesnt see a TON of action other than the daily driver stuff...it'd probably be fine

03-08-2004, 08:11 PM	#5
DoctorK Posts: n/a	alright cool, does anyone know of a website i could go to? or maybe a phone number to call? thanks for your help guys

03-08-2004, 08:27 PM	#7
DoctorK Posts: n/a	ok... so the name of the part is a "rear subframe" ? my options are : rear suspension rear trailing arm rear locating arm ... < = noob

03-08-2004, 08:55 PM	#8
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	yes, but it is also known as rear crossmember Dont use a site that forces you to use a prefabbed list...call a local place out of your phone book (be sure to specify rear of the vehicle...MANY people get confused and think front end dealing w/ steering)

03-08-2004, 09:03 PM	#9
DoctorK Posts: n/a	alright thanks guys, now i know what it is i'm looking for, i'll call the local dealership to find out where / how much. tc

03-09-2004, 04:27 PM	#11
DoctorK Posts: n/a	well damn so i would probably have to buy a fairly large peice i take it... would it be easier to grind off the old weld and re-weld it? what type of weldrod would i use on that stuff?

03-09-2004, 05:46 PM	#12
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	no, you can just buy that piece (people that run large diameter rear sway bars often break this part and have it replaced) I really doubt just welding up the tear is going to really fix it, but it would certainly do for a tempory fix as long as you dont do some serious driving/turing.

03-09-2004, 06:54 PM	#15
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	you can replace it, yes. but it is easier to weld it back up as a temp fix so you can drive it to the jyard to get your new used subframe off another civic

03-09-2004, 06:55 PM	#16
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	How weird... I'll have to check that out this weekend. If it can be done myself then f*ck taking it anywhere. __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

03-09-2004, 08:44 PM	#17
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	if you can weld then you can easily do it w/ the part, a jack, a square or 2, and your welder. Some say that its bolted, some say its welded...it varies per generation and I dont know enough to say for sure.

03-10-2004, 07:54 AM	#18
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	on the pre-92's it's welded. 92 and up it's bolted. __________________

03-10-2004, 06:56 PM	#19
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	So if i get that welded back together is it going to be steady enough for day to day driving? Should i even bother? __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

03-10-2004, 07:26 PM	#20
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	yeah it'd be fine. thats the whole point its only welded around the edges anyways but if youre still afraid just run so big bolts through the center

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode