.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Tech Talk > High Performance > Turbo
User Name
Password
FAQ Members List Calendar Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-06-2004, 12:58 PM   #2
thermal
Banning Machine
 
thermal's Avatar
 
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
First off, which turbo kit are you planning on getting. Having a 7th gen civic, you really dont have so many options. The HP gain and torque that you have calculated is achievable depending on your set-up: fuel management (tuned) being the most important that will go along with the turbo size. However I doubt that you will gain that much power without a high flow exhaust system. That 3 inch" system may get you close.

As far as the boost controller, will never go back to manual after using both the GReddy profec-B spec1 and profec-B spec2. It is more expensive but it does make a difference. I think any electronic boost controller is better than any manual. A manual boost controller relies on spring tension (and its setting) to control boost, therefore will gradually open the wastegate as the compressor signal overcomes the spring tension. On electronic boost controllers, the head unit receives the signal from compressor and waits until the demanded set point is reached, then will send the signal for the solenoid/pump to open the wastegate in one full signal vice gradual (like what manual boost controllers do). This reduces lag.
__________________


Project Teg

Visit the Turbo Forum
thermal is offline   Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:38 PM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com