.:HSTuners::

nonovurbizniz · 02-27-2004, 11:50 PM

I still have to get the rotor and drill it for 4x100 and see how it fits/lines up... then I'll check to see if my 15" konigs fit over them... if they do I will work on shimming it or shaving it to line everything up...

Then it's a matter of me saving enough for some rebuilt calipers and some brembo blanks...

As there is only the one caliper off the car I got this one off of.

As mentioned above and over there... if I can get it to work I'll do a good write up with pictures... and it'll happen pretty fast too I hope...

The car already stops pretty F'ing fast... but more never hurt.

02-27-2004, 11:50 PM	#1
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	I still have to get the rotor and drill it for 4x100 and see how it fits/lines up... then I'll check to see if my 15" konigs fit over them... if they do I will work on shimming it or shaving it to line everything up... Then it's a matter of me saving enough for some rebuilt calipers and some brembo blanks... As there is only the one caliper off the car I got this one off of. As mentioned above and over there... if I can get it to work I'll do a good write up with pictures... and it'll happen pretty fast too I hope... The car already stops pretty F'ing fast... but more never hurt. __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode