Gauge Cluster backlight wont turn on.

okay, i figured out what was causing it to not work, the thin flexible circuit board cracked at where the first light was, i soldered a new piece of wire and that fixed the problem.

however.

i took apart my middle part of the dash today to fix an issue i was having with my deck not sliding in all the way. I fixed it, but now when i turn my lights on, every light on my dash is out. my cluster which i just fixed, the climate control and the shifter light (i have an auto).

I checked all the fuses, which were all good. I pulled the deck back out and wiggled all the connectors i could find to see if anything would flicker. Nothing.

What should i do now?