.:HSTuners::

*pdiggitydogg* · 12-08-2003, 09:15 PM

Alright...I really am interested in this little thing...well learning about it anyways.

I found pictures but thats about it...and the pics werent good enough for me to figure out how it works

Im guessing that its just a spacer that has connectors on it for hoses (for turbo or pressure/temp hoses for gauges) and then the oil filter goes on the end of the adapter.

is that it?

ebpda9 · 12-08-2003, 09:19 PM

i've seen them a lot being used with oil filter relocator kits, or run the oil lines to the turbo.

*pdiggitydogg* · 12-08-2003, 09:41 PM

oo found this on h-t
http://honda-tech.com/zerothread?id=486709
do some scrolling and you'll see that you can get adapters to change the out-lines

price is relatively higher, but i think the fact that its adaptable justifies it...and it looks better

12-09-2003, 08:53 PM

you could you use the lines you run for a gauge if you'd like, but it wouldn't be as accurate as running it from the block directly.

believe it or not, go to any uhaul (yes, that uhaul) and get the oil cooler through them...it comes with a sandwich adapter, thick rubber lines, all the bolts and what not. it also comes with the core, but fluidyne makes much better core that could be fitted right on it. i didn't want to spend a alot on an oil cooler and this works just as well, for bout 100 bucks plus whichever core you decide to use.

i have it currently on my impreza and will be doing this soon to a 240sx.

-salvatore

thermal · 12-11-2003, 12:36 PM

I ordered 2 of those. One for each of my car. The best part is that the oild that comes out of it is filtered. There are usually 2 connections on the side of those: 1) For a supply line to a turbo or VTEC head (on Hondas LS/CRVTEC). 2) For an oil pressure gauge tap.

12-31-2003, 12:21 AM

i wanna order some myself. i like their fuel rails and vacuum blocks.

thermal · 01-02-2004, 04:27 AM

The one from GReddy is expensive tho. I ordered the one from www.motormatrix.com

12-08-2003, 09:15 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	oil filter sandwich adapter Alright...I really am interested in this little thing...well learning about it anyways. I found pictures but thats about it...and the pics werent good enough for me to figure out how it works Im guessing that its just a spacer that has connectors on it for hoses (for turbo or pressure/temp hoses for gauges) and then the oil filter goes on the end of the adapter. is that it?

12-08-2003, 09:19 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	i've seen them a lot being used with oil filter relocator kits, or run the oil lines to the turbo. __________________

12-11-2003, 12:36 PM	#5
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I ordered 2 of those. One for each of my car. The best part is that the oild that comes out of it is filtered. There are usually 2 connections on the side of those: 1) For a supply line to a turbo or VTEC head (on Hondas LS/CRVTEC). 2) For an oil pressure gauge tap. __________________ Project Teg Visit the Turbo Forum

01-02-2004, 04:27 AM	#7
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	The one from GReddy is expensive tho. I ordered the one from www.motormatrix.com __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-08-2003, 09:41 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	oo found this on h-t http://honda-tech.com/zerothread?id=486709 do some scrolling and you'll see that you can get adapters to change the out-lines price is relatively higher, but i think the fact that its adaptable justifies it...and it looks better

12-09-2003, 08:53 PM	#4
otaku64 Posts: n/a	you could you use the lines you run for a gauge if you'd like, but it wouldn't be as accurate as running it from the block directly. believe it or not, go to any uhaul (yes, that uhaul) and get the oil cooler through them...it comes with a sandwich adapter, thick rubber lines, all the bolts and what not. it also comes with the core, but fluidyne makes much better core that could be fitted right on it. i didn't want to spend a alot on an oil cooler and this works just as well, for bout 100 bucks plus whichever core you decide to use. i have it currently on my impreza and will be doing this soon to a 240sx. -salvatore

12-31-2003, 12:21 AM	#6
vtectuned Posts: n/a	i wanna order some myself. i like their fuel rails and vacuum blocks.