.:HSTuners::

nonovurbizniz · 11-12-2003, 10:36 PM

the ONLY honda that comes with larger than 270 (maybe it's 230 or 220) cc injectors is the h22 with vtec and the NSX... they're 310 (or if the norms are 220-230 then the biggers are 270)...

Can't remember but basically NO honda injector is going to flow enough fuel for a big turbo or nitrous set up...

The most common thing used are DSM 440cc injectors... If you're engine already has the resistor pack for the injectors (pre 93 I think) then you don't even need to mod anything...

But if they are for a newer one you need to either solder resistors inline or buy a resistor pack from an older honda...

Either way it would NOT be a good idea to upgrad to that size without some sort of forced induction...

Even the larger honda injectors would be pointless without some serious NA work.

11-12-2003, 10:36 PM	#3
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	the ONLY honda that comes with larger than 270 (maybe it's 230 or 220) cc injectors is the h22 with vtec and the NSX... they're 310 (or if the norms are 220-230 then the biggers are 270)... Can't remember but basically NO honda injector is going to flow enough fuel for a big turbo or nitrous set up... The most common thing used are DSM 440cc injectors... If you're engine already has the resistor pack for the injectors (pre 93 I think) then you don't even need to mod anything... But if they are for a newer one you need to either solder resistors inline or buy a resistor pack from an older honda... Either way it would NOT be a good idea to upgrad to that size without some sort of forced induction... Even the larger honda injectors would be pointless without some serious NA work. __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode