.:HSTuners::

*AzCivic* · 09-04-2003, 11:56 PM

no it won't work. the head bolt pattern is off, you could correct this but the money/time/effort it would take would far outway any benefit of a DOHC motor. not to mention you'd have to swap in the pistons from the ZC as well since the head chamber volume of the zc is alot more compared to a d16z6 and keeping the stock Z6 pistons in would yield a big drop in compression, giving a loss in power.

so in short, no.

are you trying to make cheap N/A power?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-04-2003, 11:56 PM	#1
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	no it won't work. the head bolt pattern is off, you could correct this but the money/time/effort it would take would far outway any benefit of a DOHC motor. not to mention you'd have to swap in the pistons from the ZC as well since the head chamber volume of the zc is alot more compared to a d16z6 and keeping the stock Z6 pistons in would yield a big drop in compression, giving a loss in power. so in short, no. are you trying to make cheap N/A power?