.:HSTuners::

2ndGenTeg · 07-22-2003, 05:53 PM

You can't stroke and run Toda Cams, except for the Spec A. The Spec B and Spec C both require a high redline. The same is true of the Gude and Skunk2, though not as drastic.

I would recommend EITHER stroking or upgrading your camshafts, but not both. It would be like putting high compression pistons in a boosted motor.

If you've decided on increasing displacement and swapping camshafts, I would bore the cylinders and go with either The Toda Spec B or Jun Stage 2 cams.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-22-2003, 05:53 PM	#1
2ndGenTeg 4th Gear Join Date: Aug 2001 Location: Boulder, CO Age: 45 Posts: 830	You can't stroke and run Toda Cams, except for the Spec A. The Spec B and Spec C both require a high redline. The same is true of the Gude and Skunk2, though not as drastic. I would recommend EITHER stroking or upgrading your camshafts, but not both. It would be like putting high compression pistons in a boosted motor. If you've decided on increasing displacement and swapping camshafts, I would bore the cylinders and go with either The Toda Spec B or Jun Stage 2 cams.