.:HSTuners::

BlackWolf · 07-18-2003, 10:53 AM

Just go to the junkyard and get everything you need then buy a good clutch assembly and clutch new. This is what I did with my old car. Also, check to see if you have the holes in the firewall to mount the new clutch and brake pedal. You should but for some reason, some cars (manufacturers) don't. THAT's where you'll run into major problems if you don't have the holes already. Other than that, it's just a PITA to do, not hard to do, just a PITA.

07-18-2003, 10:53 AM	#1
BlackWolf La Loba Loca Join Date: Dec 2002 Location: Nor Cal Posts: 1,016	Just go to the junkyard and get everything you need then buy a good clutch assembly and clutch new. This is what I did with my old car. Also, check to see if you have the holes in the firewall to mount the new clutch and brake pedal. You should but for some reason, some cars (manufacturers) don't. THAT's where you'll run into major problems if you don't have the holes already. Other than that, it's just a PITA to do, not hard to do, just a PITA. __________________ Does the noise in my head bother you??

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode