Car lagging in power...

[nonovurbizniz]

Originally posted by highlander
step one: open a beer

step two: look aimlessly around under your hood until you think you know which bolts you need to remove

step three: take off the bolts- only remove one piece at a time so you can keep track of it easier

step four: clean with a rag

step five: put it all back together

step six: open another beer

have fun

No offense but that is HORRIBLY advise for how to clean injectors or tb... or spark plugs...

To clean the injectors... run a bottle of fuel injector cleaner through the car... unless you have an ultrasonic cleaner then It's not worth doing it ANY other way...

For the tb... I would't even bother... but If you want you just disconect the intake pipe and clean the exposed part and both sides of the throttle plate... use SPARING amounts of tb or carb cleaner... and use a tooth brush or rag on a stick to clean them...

it probobly won't do anything as the intake air is pretty clean on honda's... some cars have the pcv going into the intake tube so it sucks oil fumed air sometimes... honda's usually blow the pcv air directly into the intake manifold.