.:HSTuners::

07-09-2003, 12:55 PM

Ok, heres what you have to do.
1. Pop the hood and remove the 5 screw that holds the upper grill in place and then remove the grill.
2. There is a screw in the fender well right where the bumper ends. You can see it if you move the fender lining. So unscrew that. You have to do the same thing for the other side.
3. Remove your turn signal lense and you will see 2 bolts on each side that holds the beam. I think you use a 12mm wrench and unscrew those on both sides.
4. The bumper is removed, it is easy to go from there.

PM me if you have any problems.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-09-2003, 12:55 PM	#1
rhdune16 Posts: n/a	Ok, heres what you have to do. 1. Pop the hood and remove the 5 screw that holds the upper grill in place and then remove the grill. 2. There is a screw in the fender well right where the bumper ends. You can see it if you move the fender lining. So unscrew that. You have to do the same thing for the other side. 3. Remove your turn signal lense and you will see 2 bolts on each side that holds the beam. I think you use a 12mm wrench and unscrew those on both sides. 4. The bumper is removed, it is easy to go from there. PM me if you have any problems.