.:HSTuners::

05-12-2003, 10:58 PM

OK here's a good one for all of you. What would need to be done to drop a GSR

engine into an LS

... The LS im looking at is only 2500

. Is this do-able and how complicated? What is needed and estimated cost...thanks alot guys!

ebpda9 · 05-13-2003, 12:24 AM

what type of body is the car ? is it a 90-93 or a 94-01 ? i think it will be a pretty straight forward swap

05-13-2003, 12:31 AM

it my new handle uh its a 94+ integra any other questions?

05-13-2003, 08:27 AM

motor, ecu, wiring harness, throttle cable for that engine, motor mounts (maybe) and people who know what they are doing.

we did my friend itr to his hatch swap from start to finish with 4 people 3 hrs 22 minutes this was dropping the old cx engine and putting in and wiring up the new one. its not hard.

2ndGenTeg · 05-14-2003, 02:37 PM

Easy, straight swap. Any motor labeled "complete swap" will have everything you need. The B18B-B18C conversion is a peiece of cake- no new mounts, hydro trannies- as straightforward as swaps can be

05-20-2003, 06:56 PM

LS and GSR same car different engine

05-12-2003, 10:58 PM	#1
300zxtasy Posts: n/a	GSR engine into an LS OK here's a good one for all of you. What would need to be done to drop a GSR engine into an LS ... The LS im looking at is only 2500 . Is this do-able and how complicated? What is needed and estimated cost...thanks alot guys!

05-13-2003, 12:24 AM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	what type of body is the car ? is it a 90-93 or a 94-01 ? i think it will be a pretty straight forward swap __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-13-2003, 12:31 AM	#3
GotGSR Posts: n/a	it my new handle uh its a 94+ integra any other questions?

05-13-2003, 08:27 AM	#4
Novtec1 Posts: n/a	motor, ecu, wiring harness, throttle cable for that engine, motor mounts (maybe) and people who know what they are doing. we did my friend itr to his hatch swap from start to finish with 4 people 3 hrs 22 minutes this was dropping the old cx engine and putting in and wiring up the new one. its not hard.

05-14-2003, 02:37 PM	#5
2ndGenTeg 4th Gear Join Date: Aug 2001 Location: Boulder, CO Age: 45 Posts: 830	Easy, straight swap. Any motor labeled "complete swap" will have everything you need. The B18B-B18C conversion is a peiece of cake- no new mounts, hydro trannies- as straightforward as swaps can be

05-20-2003, 06:56 PM	#6
Shot 2 Hel Posts: n/a	LS and GSR same car different engine