.:HSTuners::

blind34_1 · 03-23-2003, 10:54 PM

make sure you torqued the lugs down to spec. otherwise you'll get a nasty wobble like that. to spec would be, somewhere aorund where you can't turn your tire iron anymore BY HAND. dont use a pipe or anything, cause they'll be on there so tight nothing short of welding a nut onto it and impact gunning it off will remove it...ask me how I know.

but yeah, also check the bolt pattern and if they are balanced. if in doubt, dont buy htem from him.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-23-2003, 10:54 PM	#5
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 41 Posts: 1,813	make sure you torqued the lugs down to spec. otherwise you'll get a nasty wobble like that. to spec would be, somewhere aorund where you can't turn your tire iron anymore BY HAND. dont use a pipe or anything, cause they'll be on there so tight nothing short of welding a nut onto it and impact gunning it off will remove it...ask me how I know. but yeah, also check the bolt pattern and if they are balanced. if in doubt, dont buy htem from him.