.:HSTuners::

VTracer19 · 03-11-2003, 09:22 PM

Sup all, just wanted to an opinion on this...i found a exhaust setup that i want....goto the link to see...i dont want anything fancy so just bare with me....
http://www.streetbeatcustoms.com/tucmt622.html
(the muffler that i want)
http://www.bigbangelectronics.com/pr...=5&pf_id=MS304
(the rear section exhaust)

if u guys know where i can it cheaper....let me know...if not just tell me if it's worth it...PEACE

ebpda9 · 03-11-2003, 09:26 PM

sounds good to me, but i dunno abot ractive products

Duckydos · 03-11-2003, 10:09 PM

I am not 110% sure about this, but I believe that you will still have to have the muffler welded to the pipe (or have a flange welded onto the muffler). That universal muffler has no flange or fittings to bolt onto the pipes. Consider that it will be another $25 - $75 to get the muffler put onto the pipes...

---
Oh, and the pipes you selected has an inline "resonator" (like a 2nd muffler) so it won't be super loud... good choice.

Duckydos · 03-11-2003, 10:19 PM

What I did for my muffler... I got a universal muffler at my local performance shop. Took it to Midas, paid them $175. They took off the old piping (which was extremely narrow) from the cat. They fitted 2.25" pipes and the muffler on. It's relatively loud, but I'm happy with it. The only down side is that it's not "mendral bent".

VTracer19 · 03-12-2003, 10:51 AM

yeah i i'm gonna take the setup to the local muffler shop and have them weld hinges onto the muffler. that shouldn't cost much...i dont need anything too special, soemthing that will improve performace but will also not cost an arm and a leg, so like lets say 350 for a custom cat-back...not bad i think, i dont care who makes the products...stainless steel is still stainless steel, no matter who makes it

Duckydos · 03-12-2003, 12:25 PM

I am not a materials expert, so, is there a difference between T-304 Cabron Steel and Stainless Steel? The piping you were looking out is carbon steel...

VTracer19 · 03-12-2003, 02:39 PM

DUCKy is right.....i found the correct piping...it is stainlesssteel i even called them to conferm....here is the link...only $10 more...
http://www.streetbeatcustoms.com/ssinpip94hon.html. enjoy...peace

Duckydos · 03-12-2003, 03:50 PM

Yay, for once I did something right!
In other news, I am going to destroy my Accord... it's pissing me off royally.

VTracer19 · 03-12-2003, 10:11 PM

what ur accord doing??

Duckydos · 03-13-2003, 06:46 AM

The biggest of my worries at the moment is:
http://www.hstuners.com/forums/showt...threadid=13436

But in other news, I am going to the track tomorrow night. I'll post time slips when I get a chance, I hope/expect to be running about 15.90 @ 85mph. We'll see how things work out

03-11-2003, 09:22 PM	#1
VTracer19 1st Gear Join Date: Jan 2003 Location: VERMONT Age: 42 Posts: 96	What u think of this setup? Sup all, just wanted to an opinion on this...i found a exhaust setup that i want....goto the link to see...i dont want anything fancy so just bare with me.... http://www.streetbeatcustoms.com/tucmt622.html (the muffler that i want) http://www.bigbangelectronics.com/pr...=5&pf_id=MS304 (the rear section exhaust) if u guys know where i can it cheaper....let me know...if not just tell me if it's worth it...PEACE

03-11-2003, 09:26 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	sounds good to me, but i dunno abot ractive products __________________

03-11-2003, 10:09 PM	#3
Duckydos Registered User Join Date: Mar 2003 Location: Orlando, FL Age: 41 Posts: 1,048	I am not 110% sure about this, but I believe that you will still have to have the muffler welded to the pipe (or have a flange welded onto the muffler). That universal muffler has no flange or fittings to bolt onto the pipes. Consider that it will be another $25 - $75 to get the muffler put onto the pipes... --- Oh, and the pipes you selected has an inline "resonator" (like a 2nd muffler) so it won't be super loud... good choice. __________________ Had an Accord. Then I had something European. Now I have an SCCA Solo-II monster!

03-12-2003, 12:25 PM	#6
Duckydos Registered User Join Date: Mar 2003 Location: Orlando, FL Age: 41 Posts: 1,048	I am not a materials expert, so, is there a difference between T-304 Cabron Steel and Stainless Steel? The piping you were looking out is carbon steel... __________________ Had an Accord. Then I had something European. Now I have an SCCA Solo-II monster!

03-12-2003, 03:50 PM	#8
Duckydos Registered User Join Date: Mar 2003 Location: Orlando, FL Age: 41 Posts: 1,048	Yay, for once I did something right! In other news, I am going to destroy my Accord... it's pissing me off royally. __________________ Had an Accord. Then I had something European. Now I have an SCCA Solo-II monster!

03-12-2003, 10:51 AM	#5
VTracer19 1st Gear Join Date: Jan 2003 Location: VERMONT Age: 42 Posts: 96	yeah i i'm gonna take the setup to the local muffler shop and have them weld hinges onto the muffler. that shouldn't cost much...i dont need anything too special, soemthing that will improve performace but will also not cost an arm and a leg, so like lets say 350 for a custom cat-back...not bad i think, i dont care who makes the products...stainless steel is still stainless steel, no matter who makes it

03-12-2003, 02:39 PM	#7
VTracer19 1st Gear Join Date: Jan 2003 Location: VERMONT Age: 42 Posts: 96	DUCKy is right.....i found the correct piping...it is stainlesssteel i even called them to conferm....here is the link...only $10 more... http://www.streetbeatcustoms.com/ssinpip94hon.html. enjoy...peace

03-12-2003, 10:11 PM	#9
VTracer19 1st Gear Join Date: Jan 2003 Location: VERMONT Age: 42 Posts: 96	what ur accord doing??

03-13-2003, 06:46 AM	#10
Duckydos Registered User Join Date: Mar 2003 Location: Orlando, FL Age: 41 Posts: 1,048	The biggest of my worries at the moment is: http://www.hstuners.com/forums/showt...threadid=13436 But in other news, I am going to the track tomorrow night. I'll post time slips when I get a chance, I hope/expect to be running about 15.90 @ 85mph. We'll see how things work out __________________ Had an Accord. Then I had something European. Now I have an SCCA Solo-II monster!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode